Table 8 Main results for the polylactic... | Emerald Publishing

Table 8

Main results for the polylactic acid plasticized samples manufactured by additive manufacturing with longitudinal pattern

Reference	$θ_{0}$ (°)	$θ_{300}$ (°)	R_r (%)
PLA-L	178.6 ± 0.5	72.5 ± 1.7	59.4 ± 1.0
10TEC-L	178.5 ± 0.4	126.5 ± 0.6	29.1 ± 0.4
20TEC-L	166.0 ± 0.8	154.0 ± 2.2	7.2 ± 1.5
10TEC/PLA/10TEC-L	178.3 ± 1.0	104.8 ± 0.7	41.2 ± 0.4
20TEC/PLA/20TEC-L	114.5 ± 1.3	43.0 ± 0.8	62.4 ± 0.3
PLA/10TEC/PLA-L	177.0 ± 0.8	79.0 ± 0.8	55.4 ± 0.7
20TEC/10TEC/20TEC-L	103.0 ± 0.8	62.5 ± 0.6	39.3 ± 0.7
PLA/20TEC/PLA-L	177.3 ± 1.0	32.8 ± 1.0	81.5 ± 0.6
10TEC/20TEC/10TEC-L	159.0 ± 0.8	42.4 ± 0.4	73.3 ± 0.4

Reference	$θ_{0}$ (°)	$θ_{300}$ (°)	R_r (%)
PLA-L	178.6 ± 0.5	72.5 ± 1.7	59.4 ± 1.0
10TEC-L	178.5 ± 0.4	126.5 ± 0.6	29.1 ± 0.4
20TEC-L	166.0 ± 0.8	154.0 ± 2.2	7.2 ± 1.5
10TEC/PLA/10TEC-L	178.3 ± 1.0	104.8 ± 0.7	41.2 ± 0.4
20TEC/PLA/20TEC-L	114.5 ± 1.3	43.0 ± 0.8	62.4 ± 0.3
PLA/10TEC/PLA-L	177.0 ± 0.8	79.0 ± 0.8	55.4 ± 0.7
20TEC/10TEC/20TEC-L	103.0 ± 0.8	62.5 ± 0.6	39.3 ± 0.7
PLA/20TEC/PLA-L	177.3 ± 1.0	32.8 ± 1.0	81.5 ± 0.6
10TEC/20TEC/10TEC-L	159.0 ± 0.8	42.4 ± 0.4	73.3 ± 0.4

Source(s): Authors’ own work