Table 2 Printing parameters used in the... | Emerald Publishing

Table 2

Printing parameters used in the manufacture of the specimens

Parameter	PETG	PLA	PLA 3D870
Nozzle diameter (mm)	0.4	0.4	0.4
Layer height (mm)	0.2	0.2	0.2
Extrusion temperature (°C)	235	220	220
Bed temperature (°C)	90	60	60
Fill density at the bottom (%)	100	100	100
Fill density on the wall (%)	100	100	100
Fill pattern	Lines	Lines	Lines
Fill density (%)	100	100	100
Number of bottom layers	12	12	12
Bottom thickness (mm)	2.4	2.4	2.4
Printing time	1 h 13 m	52 m	52 m
Filament weight (g)	8	7	7
Filament length (m)	2.53	2.26	2.26

Parameter	PETG	PLA	PLA 3D870
Nozzle diameter (mm)	0.4	0.4	0.4
Layer height (mm)	0.2	0.2	0.2
Extrusion temperature (°C)	235	220	220
Bed temperature (°C)	90	60	60
Fill density at the bottom (%)	100	100	100
Fill density on the wall (%)	100	100	100
Fill pattern	Lines	Lines	Lines
Fill density (%)	100	100	100
Number of bottom layers	12	12	12
Bottom thickness (mm)	2.4	2.4	2.4
Printing time	1 h 13 m	52 m	52 m
Filament weight (g)	8	7	7
Filament length (m)	2.53	2.26	2.26

Source:

Table by authors