SLM280HL additive printing parameters
| Parameter | Value | Units |
|---|---|---|
| Layer height | 0.04 | (mm) |
| Platform preheating | 200 | (°C) |
| Inert gas | Nitrogen | (−) |
| Pump performance | 76 | (%) |
| Outer contour setting | ||
| Number of contours | 1 | (−) |
| Contour spacing | 0.08 | (mm) |
| Laser performance | 250 | (W) |
| Scanning speed | 600 | (mm/s) |
| Inner filling settings | ||
| Filling strategy | Hatches | (−) |
| Laser beam distance | 0.12 | (mm) |
| Distance between hatching strips | strips suppressed | (mm) |
| Hatching strip width | strips suppressed | (mm) |
| Laser performance | 250 | (mm) |
| Scanning speed | 802 | (mm/s) |
| Support parameter setting | ||
| Laser performance | 150 | (W) |
| Scanning speed | 400 | (mm/s) |
| Layer height | 0.04 | (mm) |
| Platform preheating | 200 | (°C) |
| Inert gas | Nitrogen | (−) |
| Pump performance | 76 | (%) |
| Number of contours | 1 | (−) |
| Contour spacing | 0.08 | (mm) |
| Laser performance | 250 | (W) |
| Scanning speed | 600 | (mm/s) |
| Filling strategy | Hatches | (−) |
| Laser beam distance | 0.12 | (mm) |
| Distance between hatching strips | strips suppressed | (mm) |
| Hatching strip width | strips suppressed | (mm) |
| Laser performance | 250 | (mm) |
| Scanning speed | 802 | (mm/s) |
| Laser performance | 150 | (W) |
| Scanning speed | 400 | (mm/s) |
Sharing content requires targeting cookies to be enabled. Please update your cookie preferences to use this feature.