Equipment, software and sintering parameters used to manufacture samples using the BDM process
| Parameter | Value | |
|---|---|---|
| Equipment | DM Studio 2 | |
| Material | 17-4PH | H-13 |
| Software | Live SuiteTM | |
| Layer thickness (mm) | 0.2 | |
| Layer thickness of the first layer (mm) | 0.2 | |
| Outer/inner printing speed (mm/s) | 15 | |
| Green part mass (g) | 53 | |
| Finished part mass (g) | 24 | |
| Sintering ramp one | 1100°C for 1 h | |
| Sintering ramp two | 1300°C for 2 h | 1325°C for 2 h |
| Sintering pressure set point | Best vacuum | |
| Sintering atmosphere | Ar with 3% H | Ar 100% |
| Parameter | Value | |
|---|---|---|
| Equipment | ||
| Material | 17-4PH | H-13 |
| Software | Live Suite | |
| Layer thickness (mm) | 0.2 | |
| Layer thickness of the first layer (mm) | 0.2 | |
| Outer/inner printing speed (mm/s) | 15 | |
| Green part mass (g) | 53 | |
| Finished part mass (g) | 24 | |
| Sintering ramp one | 1100°C for 1 h | |
| Sintering ramp two | 1300°C for 2 h | 1325°C for 2 h |
| Sintering pressure set point | Best vacuum | |
| Sintering atmosphere | Ar with 3% H | Ar 100% |
Sharing content requires targeting cookies to be enabled. Please update your cookie preferences to use this feature.