Table 3. Information about the sensors... | Emerald Publishing

Table 3.

Information about the sensors used in the experimental study

Measure	Sensor type	Model	Range	Accuracy
Meteorological station
Air temperature	Thermo hygrometer	DMA875	−30°C to +70°C	0.05°C
Relative humidity	Thermo hygrometer	DMA876	0 to 100%	0.25%
Atmospheric pressure	Piezoelettric	DQA	800 to 1,100 hPa	0.5 hPa
Wind velocity	Anemometer	WMT700	0 to 75 m/s	/
Wind direction	Anemometer	WMT700	0 to 270°	/
Solar radiation	Radiometer	DPA153	0 to 2,000 W/m²	<5%
Wall sensors
Surface temperature	Platinum resistor	PT 100	−40°C to +80°C	0.05°C
Heat flux	Heat flow meter	HFP01	−2,000 to +2,000 W/m²	2%
Air velocity	Anemometer	ESV107	0,01 ÷ 20 m/s	0.03 m/s

Measure	Sensor type	Model	Range	Accuracy
Meteorological station
Air temperature	Thermo hygrometer	DMA875	−30°C to +70°C	0.05°C
Relative humidity	Thermo hygrometer	DMA876	0 to 100%	0.25%
Atmospheric pressure	Piezoelettric	DQA	800 to 1,100 hPa	0.5 hPa
Wind velocity	Anemometer	WMT700	0 to 75 m/s	/
Wind direction	Anemometer	WMT700	0 to 270°	/
Solar radiation	Radiometer	DPA153	0 to 2,000 W/m²	<5%
Wall sensors
Surface temperature	Platinum resistor	PT 100	−40°C to +80°C	0.05°C
Heat flux	Heat flow meter	HFP01	−2,000 to +2,000 W/m²	2%
Air velocity	Anemometer	ESV107	0,01 ÷ 20 m/s	0.03 m/s