Fixed process parameters for investigation of tensile strength
| Process parameter | Unit | Value |
|---|---|---|
| Build material | – | PC white |
| Part interior style | – | Solid-normal |
| Visible surface style | – | Normal |
| Support style | – | Basic |
| Part XY shrink factor | – | 1.0071 |
| Part Z shrink factor | – | 1.0070 |
| Contour to raster air gap | mm | 0.000 |
| Contour to contour air gap | mm | 0.000 |
| Layer thickness | mm | 0.1778 |
| Raster width | mm | 0.3556 |
| Contour width | mm | 0.3556 |
| Process parameter | Unit | Value |
|---|---|---|
| Build material | – | PC white |
| Part interior style | – | Solid-normal |
| Visible surface style | – | Normal |
| Support style | – | Basic |
| Part XY shrink factor | – | 1.0071 |
| Part Z shrink factor | – | 1.0070 |
| Contour to raster air gap | mm | 0.000 |
| Contour to contour air gap | mm | 0.000 |
| Layer thickness | mm | 0.1778 |
| Raster width | mm | 0.3556 |
| Contour width | mm | 0.3556 |
Sharing content requires targeting cookies to be enabled. Please update your cookie preferences to use this feature.