Figure 2
The seven latent variables are each represented by a circular node with the following labels: “L E A,” “C L I,” “S T R,” “P E O,” “R E S,” “P R O,” and “R E.” “L E A” is positioned at the center left. Six rightward arrows from six rectangles arranged in a vertical series on the left and labeled from top to bottom as “L E A 1,” “L E A 2,” “L E A 3,” “L E A 4,” “L E A 5,” and “L E A 6” point to “L E A.” Arrows extend from “L E A” toward “C L I,” “S T R,” “P E O,” “R E S,” “P R O,” and “R E.” “C L I” is positioned at the upper left. Seven rightward arrows from seven rectangles arranged in a vertical series on the left and labeled from top to bottom as “C L I 1,” “C L I 2,” “C L I 3,” “C L I 4,” “C L I 5,” “C L I 6,” and “C L I 7” point to “C L I.” Arrows extend from “C L I” toward “L E A,” “S T R,” and “P R O.” “S T R” is positioned below “L E A” near the bottom left corner. Six rightward arrows from six rectangles arranged in a vertical series on the left and labeled from top to bottom as “S T R 1,” “S T R 2,” “S T R 3,” “S T R 4,” “S T R 5,” and “S T R 6” point to “S T R.” Arrows extend from “S T R” toward “R E.” “P E O” is positioned at the upper center. Four downward arrows from four rectangles arranged in a horizontal series above it and labeled from left to right as “P E O 1,” “P E O 2,” “P E O 3,” and “P E O 4” point to “P E O.” Arrows extend from “P E O” toward “P R O” and “R E.” “R E S” is positioned at the center. Four leftward arrows from four rectangles arranged in a vertical series on the right and labeled from top to bottom as “R E S 1,” “R E S 2,” “R E S 3,” and “R E S 4” point to “R E S.” Arrows extend from “R E S” toward “P E O.” “P R O” is positioned at the upper right. Five leftward arrows from five rectangles arranged in a vertical series on the right and labeled from top to bottom as “P R O 1,” “P R O 2,” “P R O 3,” “P R O 4,” and “P R O 5” point to “P R O.” Arrows extend from “P R O” toward “R E.” “R E” is positioned at the lower right. Seven leftward arrows from seven rectangles arranged in a vertical series on the right and labeled from top to bottom as “R E 1,” “R E 2,” “R E 3,” “R E 4,” “R E 5,” “R E 6,” and “R E 7” point to “R E.”The BIM adoption PLS-SEM model. Source: Authors’ own work