Figure 8
The horizontal axis “F W I (Objective measurement)” ranges from 0 to 80 in increments of 10 units. The vertical axis is labeled “Density” and ranges from 0.00 to 0.05 in increments of 0.01. A legend in the upper left lists two series: “F W I (analytical model)” and “F W I (expert panel)”. Three vertical dashed reference lines appear approximately at 30, 50, and 80 on the horizontal axis. The line for “F W I (analytical model)” begins near (0, 0.00), then gradually rises with small fluctuations around (20, 0.003) and (30, 0.012), continues increasing to a peak near (41, 0.049), then declines through (50, 0.033) and (60, 0.011), and approaches (75, 0.001) before ending near (85, 0.00). The line for “F W I (expert panel)” begins near (0, 0.00), increases slowly to about (25, 0.002) and (30, 0.003), then rises sharply toward (45, 0.043) and peaks near (48, 0.046). It then gradually declines through (55, 0.034) and (65, 0.012) before tapering toward (80, 0.001) and ending near (85, 0.00). Note: All numerical values are approximated.FWI: density estimation comparison (Analytical Model vs. Expert Panel). Source: Authors' own work