Figure 6
The photograph shows a rectangular red printed circuit board oriented diagonally on a light background. The board has rounded corners, and four circular mounting holes are located near each corner. At the center of the board, white printed text reads “Texas Instruments”, with the Texas Instruments logo positioned above the text. Multiple surface mounted electronic components are distributed across the board, including integrated circuits, resistors, capacitors, and connectors. Near the upper left area, a long black board to board connector is mounted horizontally. Near the upper right area, a large black square integrated circuit is positioned adjacent to a light gray rectangular patterned region printed on the board. On the lower left area, a green two pin terminal block is mounted vertically. Near the lower center edge, a black barrel power jack protrudes outward from the board. Along the lower edge, a small metallic connector is visible. On the right side of the board, a white rectangular label with a Q R code and alphanumeric text “5 6 5 9 7 0 0 0 7 7” is present, and another white label reads “I W R 1642 BOOST”. Fine white silkscreen markings, reference designators, and circuit traces are visible across the entire surface of the board.Texas instruments evaluation board IWR1642-BOOST. Source: https://www.ti.com/tool/IWR1642BOOST?keyMatch=&tisearch=search-everything&usecase=hardware