Figure 2
The path model contains five circular nodes labeled “A E S”, “S L A”, “A R O”, “S C C”, and “R I E”, each connected to rectangular boxes by arrows with numeric values. On the left side of the diagram, a circular node labeled “A E S” is located. Four rectangular boxes are arranged in a vertical series to the left of “A E S”, labeled “A E S 1”, “A E S 2”, “A E S 3”, and “A E S 4”. Arrows point from “A E S” to these boxes with the values “0.717”, “0.707”, “0.561”, and “0.691”, respectively. Near the top center-left of the diagram, a circular node labeled “S L A” contains the value “0.541”. Four rectangular boxes are arranged in a horizontal series above “S L A”, labeled “S L A 1”, “S L A 2”, “S L A 3”, and “S L A 4”. Arrows point from “S L A” to these boxes with the values “0.527”, “0.779”, “0.767”, and “0.821”, respectively. In the top center-right, a circular node labeled “A R O” contains the value “0.617”. Four rectangular boxes are arranged in a horizontal series above “A R O”, labeled “A R O 1”, “A R O 2”, “A R O 3”, and “A R O 4”. Arrows point from “A R O” to these boxes with the values “0.806”, “0.797”, “0.856”, and “0.683”, respectively. At the bottom center, a circular node labeled “S C C” contains the value “0.497”. Four rectangular boxes are arranged in a horizontal series below “S C C”, labeled “S C C 1”, “S C C 2”, “S C C 3”, and “S C C 4”. Arrows point from “S C C” to these boxes with the values “0.772”, “0.542”, “0.833”, and “0.810”, respectively. On the right side, a circular node labeled “R I E” contains the value “0.664”. Four rectangular boxes are arranged in a vertical series to the right of “R I E”, labeled “R I E 1”, “R I E 2”, “R I E 3”, and “R I E 4”. Arrows point from “R I E” to these boxes with the values “0.774”, “0.702”, “0.775”, and “0.707”, respectively. A diagonal arrow points from “A E S” to “S L A” labeled “0.735”. A diagonal arrow extends from “A E S” to “S C C” labeled “0.705”. A horizontal arrow extends from “A E S” to “R I E” labeled “0.016”. A horizontal arrow extends from “S L A” to “A R O” labeled “0.785”. A diagonal arrow extends from “S L A” to “R I E” labeled “0.503”. A diagonal arrow extends from “A R O” to “R I E” labeled “0.267”. A diagonal arrow extends from “S C C” to “R I E” labeled “0.078”.Path coefficients in the structural model. Note. SmartPLS software output