Figure 2
The diagram shows two main sections separated by a vertical dashed line. In the left section, six dark rectangular boxes are arranged vertically on the far left. From top to bottom, the labels are “C S R D”, “E F R A G”, “T A X O”, “S D G”, “A S S U R”, and “D O N E”. At the upper center, an oval is labeled “KNOWLEDGE”. Four arrows extend leftward from this oval to the boxes “C S R D”, “E F R A G”, “T A X O”, and “S D G”. The arrow values are “0.90”, “0.95”, “0.94”, and “0.75”, respectively. At the lower center, a shaded oval is labeled “PROACTIVITY INDEX”. Two arrows extend leftward from this oval to the boxes “A S S U R” and “D O N E”. The arrow values are “0.72” and “0.75”, respectively. A vertical arrow extends upward from “PROACTIVITY INDEX” to “KNOWLEDGE”. The arrow is labeled “0.75”. In the right section, two tables are shown. The upper table is titled “E F A asterisk”. It has columns “Sirst order” and “Second order”. The rows read: “lambda” with “greater than 0.76” and “greater than 0.72” “alpha” with “0.91” and “0.83” “C R” with “0.94” and “0.78” “A V E” with “0.79” and “0.55” The lower table is titled “C F A”. It has the column “first order”. The rows read: “lambda” with “greater than 0.77”. “p greater than chi squared” with “0.09”. “C F I” with “0.99”. “T L I” with “0.97”. “S R M R” with “0.02”. “R M S E A” with “0.12”. A note along the bottom reads “lambda: Factor loads; alpha: Cronbach’s Alpha; C R: Composite Reliability; A V E: Average Variance Extracted”, A second note states, “The high R M S E A value is a statistical artifact caused by the low degrees of freedom (2) in the model”.EFA analysis to analyse second-order factors of the proactivity index