Figure 2.
The vertical layout shows sections numbered 1 to 17 along a deposition hole with marked intervals and depths. The circular diagrams represent each section with labelled measurement points such as P B, U B, W B, F B, P R, U R, and F N, positioned around the circumference and within the central region. Sections 1 to 4 show fewer measurement points, while sections 5 to 10 include multiple labelled positions distributed evenly. Sections 11 to 17 show varying arrangements of points, with some sections containing central filled regions and others showing only boundary measurements. The layouts indicate spatial distribution of sensors at different depths and angular positions.Location of all sensors at 17 intervals in the deposition hole. Note: FCT, full canister test filter; PC, total stress sensor on canister surface; PR, total stress sensor at rock wall; PB, total stress sensor within the buffer; UR, pore water pressure at the rock wall; UB, pore water pressure within the buffer; WR, relative humidity; FB, filter mat between bentonite segments; FR, filter mat at the rock wall; Can, position of the canister. See Cuss et al. (2022) for a detailed map of sensor locations