Figure 6
The figure contains two side-by-side scatter plots labeled “(a). Scatter plot-R e” on the left and “(b). Scatter plot-R v” on the right. Both plots use “Geometry Number” on the horizontal axis, ranging from 1 to 30 in increments of 5 units, with dashed gridlines across the background. In the left plot, the vertical axis is labeled “R subscript e”, ranging from 0.8 to 1.2 with an interval of 0.2. Two datasets are shown: the circular markers labeled “R subscript e superscript 22” and the square markers labeled “R subscript e superscript 11”, as indicated by the legend in the upper right of the plot. The data points are distributed around a horizontal value near 1.0. The circular points show a wider spread, extending roughly from about 0.87 to 1.15, while the squares are more tightly clustered close to 1.0 across all geometry numbers. In the right plot, the vertical axis is labeled “R subscript v”, ranging from 0.6 to 1.3 with an interval of 0.1. The square markers represent the data, with a legend entry labeled “R subscript v” near the top right. The values span approximately from 0.78 to 1.25, with most points clustered around 1.0. The scatter shows variability across geometry numbers without a clearly drawn trend line. Note: All the numerical data values are approximated.Scatter plot of local-neighbor effect ratios across randomly selected unit-cell samples