Figure 5
The image illustrates a 3 D simulation of a substrate with a deposited layer. The substrate is shown at an angle, with the “Fixed support” label pointing to the left edge, enclosed in a dotted rectangle. The right edge is raised above the left edge. The “Substrate before deposition” is flat at the bottom and is shown in gray, while “Substrate after deposition” is slightly curved on the right side and shown in multiple color regions over its surface. A rectangular band over the substrate is positioned along all sides, forming a boundary and labeled “Deposited layer.” The color changes from blue on the left to light blue when moving to the right, then transitions into green, light green, yellow, orange, and red at the right corners. At the bottom right side, the side view of the substrate is shown. The gray deposition is flat and shown at the bottom, while the multiple-color deposition is in a tilted position, which is raised from the right with a height of “delta subscript z.”The geometry of the substrate before (in grey color) and after the deposition (in colored scheme). Source: Authors’ own work