Figure 4
The image shows a guide with instructions for placing connector 18 into a battery housing. The main text reads, 'Plaats connector 18 in de batterij behuizing en draai de schroef lichtjes aan met de hand.' There is a highlighted text in red that says, 'Let op! Connector draad naar je toe gericht Draai de schroef nog niet helemaal vast.' The image is split into two panels. Panel A shows an orange connector inside a battery housing. Panel B shows a close-up of the connector with a green arrow pointing to the screw. The bottom of the image has navigation buttons and a progress indicator showing 5 out of 38 steps completed.Example of digital work instructions. Translation: insert connector 18 into the battery housing and tighten the screw slightly by hand. Note: keep the connector wire facing you and do not tighten the screw all the way. Source: Authors’ own work