Figure 5
In both plots, the horizontal axis represents R plus C, and the vertical axis represents R minus C. Two types of data points are shown, one highlighted in red representing the effect and the other highlighted in green representing the cause. In the “Drivers” plot: The horizontal axis ranges from 0 to 10 in increments of 1 unit, and the vertical axis ranges from negative 2 to 2 in increments of 0.5 units. Both axes intersect at (0, 0). The data points are marked as follows: D 2 (5.43, 2.17) representing cause, D 4 (9.12, negative 0.52) representing effect, D 6 (9.44, negative 1.37) representing effect, D 7 (7.92, 0.12) representing cause, D 9 (8.03, negative 0.008) representing effect, D 10 (8.15, negative 0.23) representing effect, D 11 (8.76, 1.14) representing cause, and D 13 (8.45, negative 1.30) representing effect. In the “Barriers” plot: The horizontal axis ranges from 0 to 12 in increments of 2 units, and the vertical axis ranges from negative 2 to 2.5 in increments of 0.5 units. Both axes intersect at (0, 0). The data points are marked as follows: B 2 (9.05, negative 0.22) representing effect, B 3 (10.82, 0.057) representing cause, B 5 (8.96, negative 1.44) representing effect, B 6 (9.11, negative 0.137) representing effect, B 7 (8.59, negative 1.082) representing effect, B 8 (9.18, negative 0.293) representing effect, B 9 (9.92, negative 0.076) representing effect, B 11 (8.43, 1.57) representing cause, and B 13 (7.17, 1.93) representing cause. Note: All numerical data values are approximated.Degree of effect diagram of the (a) drivers (top) and (b) barriers (bottom). Source: Authors’ own work
