Skip to Main Content
Article navigation
Volume 13, Issue 6
1 June 1966
This article was originally published in
Anti-Corrosion Manual
Anti-Corrosion Manual Cover Image for Volume 13, Issue 6
Review Article| June 01 1966

Metals clad by explosion Available to Purchase

Author & Article Information
Publisher: Emerald Publishing
Online ISSN: 2977-7003
Print ISSN: 0066-4731
© MCB UP Limited
1966
Anti-Corrosion Manual (1966) 13 (6): 19–20.
https://doi.org/10.1108/eb006735

A developing technique offers some advantages over conventional methods of cladding relatively cheap structural metals with more costly high‐performance materials. So far, the chemical and process industries have made most use of the clad metals

This content is only available via PDF.
© MCB UP Limited
1966
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$41.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
111 Views
View Metrics
Corrosion inhibition efficacy of quinazolinone quaternary ammonium on L245N in CO2-saturated brine (5 Wt.% NaCl): synthesis, experiments and theoretical studies
Characterization and anti-corrosion performance of eco-friendly mimosa tannin-waterborne epoxy paints
Preparation and protection study of silver coating on copper wave tube
Study on regional different erosion–corrosion behavior and mechanism of Ni1725–WxC laser clad coating under high temperature and pressure environment

Suggested Reading

Cladding formation in laser‐beam fusion of metal powder
Rapid Prototyping Journal (December,1998)
Pre‐coated metal cladding – evaluating failures
Structural Survey (April,1991)
The explosion cladding process
Anti-Corrosion Manual (February,1980)
Clad Metal Circuit Board Substrates for Direct Mounting of Ceramic Chip Carriers
Circuit World (April,1982)
Laser cladding of martensitic stainless steels on armor steels
Emerging Materials Research (December,2019)

Related Chapters

83. The deformation of Zircaloy-2 fuel cladding under loss-of-coolant accident transients
Nuclear Fuel Performance
90. The influence of various metallurgical parameters and neutron flux on creep of Zircaloy 4 cladding tubes
Nuclear Fuel Performance
17. High burnup Zircaloy-clad UO2 fuel performance in the Jose Cabrera (Zorita) PWR: REFERENCES 1. BALFOUR M.G., et al., Zorita Research and Development Program: Final Report, WCAP-10180, Vol. 1, September 1982. 2. BALFOUR M.G., et al., Zorita Research and Development Program: Data Summary, WCAP-10180, Vol. 2, September 1982. 3. ROBERTS E., et al., Fuel Modeling and Performance of High Burnup Fuel Rods. Topical Meeting on Water Reactor Fuel Performance, American Nuclear Society, St. Charles, Illinois, May 1977.
Nuclear fuel performance: Proceedings of the conference held in Stratford-upon-Avon on 25–29 March 1985

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal