Skip to Main Content
Article navigation
Volume 20, Issue 10
1 October 1973
This article was originally published in
Anti-Corrosion Manual
Anti-Corrosion Manual Cover Image for Volume 20, Issue 10
Review Article| October 01 1973

The Fractographic Interpretation of Service Failures in High Strength Steels and the Care of Failed Components Available to Purchase

R.J. WANHILL;
R.J. WANHILL
Dutech National Aerospace Laboratory
Search for other works by this author on:
This Site
PubMed
Google Scholar
W.J. van de VET
W.J. van de VET
Dutech National Aerospace Laboratory
Search for other works by this author on:
This Site
PubMed
Google Scholar
Author & Article Information
Publisher: Emerald Publishing
Online ISSN: 2977-7003
Print ISSN: 0066-4731
© MCB UP Limited
1973
Anti-Corrosion Manual (1973) 20 (10): 12–14.
https://doi.org/10.1108/eb006932

Introduction This report deals with two important causes of service failures in high strength steels: stress corrosion and hydrogen embrittlement. These failure modes are often difficult to distinguish from one another fractographically, and sometimes the macroscopic and metallagraphic interpretation is also open to doubt.

This content is only available via PDF.
© MCB UP Limited
1973
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$41.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
90 Views
View Metrics
Corrosion inhibition efficacy of quinazolinone quaternary ammonium on L245N in CO2-saturated brine (5 Wt.% NaCl): synthesis, experiments and theoretical studies
Characterization and anti-corrosion performance of eco-friendly mimosa tannin-waterborne epoxy paints
Preparation and protection study of silver coating on copper wave tube
Study on regional different erosion–corrosion behavior and mechanism of Ni1725–WxC laser clad coating under high temperature and pressure environment

Suggested Reading

Stress corrosion cracking behaviour of precipitation hardened stainless steels in high purity water environments
Anti-Corrosion Methods and Materials (February,2001)
Fatigue behavior of precipitation strengthened Cu–Ni–Si alloy modified by Cr and Zr addition
International Journal of Structural Integrity (January,2020)
Effects of welding speeds on the microstructural and mechanical properties of AZ91D Mg alloy by friction stir welding
International Journal of Structural Integrity (March,2020)
Features of the microstructural and mechanical degradation of long term operated mild steel
International Journal of Structural Integrity (June,2018)
Experimental investigation on the influence of fibers orientation on the failure of carbon hybrid laminates
Aircraft Engineering and Aerospace Technology: An International Journal (July,2014)

Related Chapters

Failure of Roller Bearings on the Thelwall Viaduct
Forensic engineering: From failure to understanding: Proceedings of the two day international conference organised by the Institution of Civil Engineers and held in London on 2 to 4 December 2008
Factors controlling the irradiation embrittlement response of low alloy pressure vessel steels
Dimensional stability and mechanical behaviour of irradiated metals and alloys
PAPER 22. TEMPERED-MARTENSITE EMBRITTLEMENT IN A 12% Cr STEEL
Ferritic steels for fast reactor steam generators

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal