Article navigation
Volume 6, Issue 9
1 September 1959
This article was originally published in
Corrosion Technology
Corrosion Technology Cover Image for Volume 6, Issue 9
Review Article| September 01 1959

PRACTICAL ASPECTS OF: ELECTROLESS NICKEL PLATING

Publisher: Emerald Publishing
Online ISSN: 2155-4854
Print ISSN: 0589-8404
© MCB UP Limited
1959
Corrosion Technology (1959) 6 (9): 205.
https://doi.org/10.1108/eb019633

An article in this journal has described the basic mechanism of electroless nickel plating, as well as the main properties of the resultant plate. The present article describes certain practical aspects of electroless plating.

This content is only available via PDF.
© MCB UP Limited
1959
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Pay-Per-View Access
$41.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
134 Views
1 Crossref

New and popular articles

Boundary-element analysis and experimental validation of cathodic protection potential distribution in intersecting branch pipelines
Corrosion behavior of long-term service-exposed ductile iron for water pipelines in chloride-containing media
Improving the resistance of DSS 2101 to hydrogen induced pitting through regulating hydrogen traps
Activated Ti surface breaking the galvanic immunity to Zn

Suggested Reading

‘KANIGEN’: CHEMICAL NICKEL PLATING
Corrosion Technology (October,1956)
Textile Design with Electroless Nickel Plating
Research Journal of Textile and Apparel (May,2007)
Optimising the Electroless Nickel Plating Process for Textile Application
Research Journal of Textile and Apparel (August,2007)
Investigation of electroless nickel plating on rapid prototyping material of acrylic resin
Rapid Prototyping Journal (January,2016)
Effect of cerium addition on properties of electroless nickel‐phosphorus coatings
Anti-Corrosion Methods and Materials (June,2013)

Related Chapters

Applicability of Ferro-Nickel Slag as a Sand Compaction Pile Method Material
Geoenvironmental Engineering: Geoenvironmental Impact Management: Proceedings of the third conference organized by the British Geotechnical Association and Cardiff School of Engineering, Cardiff University, and held in Edinburgh on 17–19 September 2001
7. Examination of type 304 stainless steel and Inconel 600 coupons with various surface finishes exposed in Doel 2
Water chemistry of nuclear reactor systems 5
Integrated Electrochemical Remediation of Mixed Contaminants in Subsurface
5th ICEG Environmental Geotechnics: Opportunities, Challenges and Responsibilities for Environmental Geotechnics: Proceedings of the ISSMGE’s fifth international congress organized by the Geoenvironmental Research Centre, Cardiff University and held at Cardiff City Hall on 26–30th June 2006

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
CrossRef (1)
This Feature Is Available To Subscribers Only

or Create an Account

Close subscription notice
Close access options