Skip to Main Content
Article navigation
Volume 9, Issue 1
1 January 1962
This article was originally published in
Corrosion Technology
Corrosion Technology Cover Image for Volume 9, Issue 1
Review Article| January 01 1962

NEWS OF INDUSTRY Available to Purchase

Author & Article Information
Publisher: Emerald Publishing
Online ISSN: 2155-4854
Print ISSN: 0589-8404
© MCB UP Limited
1962
Corrosion Technology (1962) 9 (1): 24–25.
https://doi.org/10.1108/eb019925

Firth‐Vickers Look Ahead. Firth‐Vickers Stainless Steels Ltd. intend to modernise and reorganise their facilities for the production of plates and wide sheets. The scheme will cost around £4½ million and take three or four years to complete, being carried out in stages to avoid undue interference with production. The first stage is basically the replacement of obsolete mills by a new 80‐in.‐wide hot reversing mill, with fully mechanised ancillary equipment for the production of plates up to 6‐ft. finished width and from 3/16 to 1 in. thickness.

This content is only available via PDF.
© MCB UP Limited
1962
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$41.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
102 Views
View Metrics
Effect of pH values on the hydrogen damage behavior of TC4 Ti alloy
Corrosion inhibition efficacy of quinazolinone quaternary ammonium on L245N in CO2-saturated brine (5 Wt.% NaCl): synthesis, experiments and theoretical studies
Characterization and anti-corrosion performance of eco-friendly mimosa tannin-waterborne epoxy paints
Preparation and protection study of silver coating on copper wave tube

Suggested Reading

EXPANSION OF ELECTROSLAG REMELTING AT FIRTH BROWN PLANT
Anti-Corrosion Manual (December,1972)
The tidal flux in the Firth of Forth
Maritime Engineering (March,2007)
Auxiliary Equipment
Aircraft Engineering (December,1957)
Continuity and change in the Sheffield armaments industry 1919-1930
Journal of Management History (April,2018)
High‐speed continuous wire descaling: Tests of the Vacu‐Blast system by the Firth Co. Ltd.
Anti-Corrosion Manual (January,1970)

Related Chapters

CHAPTER XII. DRAINAGE AREAS OP EASTERN SCOTLAND.
WATER AND WATER-SUPPLY
CHAPTER XIII.DRAINAGE SYSTEMS OF THE WEST OP SCOTLAND.
WATER AND WATER-SUPPLY
Calculating extreme sea level estimates in complex Scottish loch systems
Coasts, marine structures and breakwaters: Adapting to change: Proceedings of the 9th international conference organised by the Institution of Civil Engineers and held in Edinburgh on 16 to 18 September 2009

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal

Gift article access

As a benefit of your subscription, you can share temporary access to restricted articles.

Each link will stop working after 30 days or 10 uses. You may create up to 10 links in a 30 day period.

Please sign in to your personal account to gift article access.

Register

Gift article access

As a benefit of your subscription, you can share temporary access to restricted articles.

Each link will stop working after 30 days or 10 uses. You may create up to 10 links in a 30 day period.

Gift articles remaining: --

Gift article access

Each link will stop working after 30 days or 10 uses. You may create up to 10 links in a 30 day period.

Gift articles remaining: --

Gift article access

As a benefit of your subscription, you can share temporary access to restricted articles.

Each link will stop working after 30 days or 10 uses.

You have reached the limit of 10 links within a 30 day period.

Sharing Unavailable

Sharing content requires targeting cookies to be enabled. Please update your cookie preferences to use this feature.