Three products from CPL

Materials

Three products from CPL

Keywords Adhesives,Ceramics, Corrosion, CPL, Paints

Corr-Paint CP4000, a new high temperature coating used to protect metals, ceramics and refractories from high temperature oxidation and corrosion to 600°C.

Corr-Paint CP4000 is a single part, water dispersible, ceramic-silicone based coating which claims exceptional thermal, moisture and salt spray resistance. It reportedly can be applied to a wide range of substrates including dense ceramics, porous insulation materials, carbon and stainless steel.

Corr-Paint CP4000 is stated to be a low VOC, non-flammable formulation which is supplied in a viscosity range of 600-1,200cps. It can be thinned with water and applied using brush, roller or spray equipment. Drying occurs within 1-2 hours and curing is accomplished usually in operation or at 230°C in 1-2 hours. It is available in aluminium, white, clear, blue, green and yellow.

Aremco-Bond 570, a new high temperature heat-curing nitrile/phenolic adhesive used to bond burner nozzle tips to ceramic bases used in industrial applications to 320°C.

According to CPL,Aremco-Bond 570 is a single component, high strength, contact adhesive which exhibits excellent thermal shock, chemical and moisture resistance. The flexible nature of Aremco-Bond 570 enables it to bond together a wide range of materiaIs including ceramics, metals, plastics, quartz and refractories. This property provides manufacturers with a direct method of attaching materials of different coefficients of expansion for use in thermal, structural and electrical applications throughout industry.

Aremco-Bond 570 reportedly demonstrates a flexural and tensile strength of 12.0 Kpsi and 9.0Kpsi respectively. Its coefficient of thermal expansion is 4.1 × 10.6in/in/°F;it is coloured black and has a viscosity of 35,000 cps at room temperature and is available in pint containers to five gallon drums.

Ceramabond 571, an advanced, high temperature magnesium oxide based ceramicadhesive, used to bond machinable glass-ceramics and metal inserts for applications to 1,600°C.

Ceramabond 571 claims a broad range of features, making it ideal for high temperature electrical and mechanical assembly, and high vacuum applications. Features include:

• Bonds ceramic-to-metal and ceramic-to-ceramic.

• Water-based, two-part, powder and liquid system.

• Easy to mix, cleans up with warm water.

• Tensile shear strength of 500+ psi.

• Torque strength of 21.6ft-lbs.

• Dielectric strength of 255 volts per mil.

• No volatiles, no outgassing.

Details: Components &Products Ltd. Tel:+44 (0) 181 302 1414; Fax: +44 (0) 181 302 2525.