Skip to Main Content
Article navigation
Volume 14, Issue 8
1 August 1967
This article was originally published in
Anti-Corrosion Manual
Anti-Corrosion Manual Cover Image for Volume 14, Issue 8
Review Article| August 01 1967

Copper‐base alloys for use in sea‐water—Part 2 Available to Purchase

Maritimer
Maritimer
Search for other works by this author on:
This Site
PubMed
Google Scholar
Author & Article Information
Publisher: Emerald Publishing
Online ISSN: 2977-7003
Print ISSN: 0066-4731
© MCB UP Limited
1967
Anti-Corrosion Manual (1967) 14 (8): 17–18.
https://doi.org/10.1108/eb005223

Phosphor bronze THE PHOSPHOR BRONZES are alloys of copper and tin to which small percentages of phosphorus (maximum about 0.4%) are added for various metallurgical reasons—but not to increase corrosion resistance.

This content is only available via PDF.
© MCB UP Limited
1967
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$41.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
117 Views
View Metrics
Preparation and protection study of silver coating on copper wave tube
Load-induced instability in tribocorrosion: contrasting behaviors of passive and non-passive steels in artificial seawater
Study on regional different erosion–corrosion behavior and mechanism of Ni1725–WxC laser clad coating under high temperature and pressure environment
A piperazine-based Mannich base as a dual-function inhibitor for L245 steel in simulated shale gas flowback water: corrosion inhibition and antimicrobial performance

Suggested Reading

Fabrication and assessment of mechanical properties of open cell porous regular interconnected metallic structure through rapid manufacturing route
Rapid Prototyping Journal (January,2018)
The Development of the Original Wire Thread Insert
Aircraft Engineering (September,1985)
The corrosion behaviour of metals and alloys in hot phosphoric acid
Anti-Corrosion Manual (May,1991)
CORROSION RESISTANCE OF ALUMINIUM BRONZES
Corrosion Technology (September,1959)
Problems of phosphoric acid manufacture
Anti-Corrosion Manual (February,1988)

Related Chapters

CHAPTER XII COPPER, COPPER ALLOYS, AND MISCELLANEOUS TESTS OF METALS
The testing of materials of construction: a text-book for the engineering laboratory and a collection of the results of experiment.
EVALUATION OF PHOSPHOGYPSUM AS AN ALTERNATIVE OF GYPSUM IN THE FABRICATION OF CEM II/A-M 32.5 R PORTLAND CEMENT
Cement Combinations for Durable Concrete: Proceedings of the International Conference held at the University of Dundee, Scotland, UK on 5–7 July 2005
SILICA PHOSPHATE IN ENGINEERING MATERIALS
Challenges of Concrete Construction: Volume 6, Concrete for Extreme Conditions: Proceedings of the International Conference held at the University of Dundee, Scotland, UK on 9–11 September 2002

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal