Skip to Main Content
Article navigation
Volume 16, Issue 6
1 June 1969
This article was originally published in
Anti-Corrosion Manual
Anti-Corrosion Manual Cover Image for Volume 16, Issue 6
Review Article| June 01 1969

Diffusion coatings for the protection of iron and steel: Part 2: Chromium Available to Purchase

R. Drewett
R. Drewett
BISRA—The Inter‐Group Laboratories of the British Steel Corporation
Search for other works by this author on:
This Site
PubMed
Google Scholar
Author & Article Information
Publisher: Emerald Publishing
Online ISSN: 2977-7003
Print ISSN: 0066-4731
© MCB UP Limited
1969
Anti-Corrosion Manual (1969) 16 (6): 10–14.
https://doi.org/10.1108/eb006771

THE METHODS available for the application of chromium coatings are listed in Table 2. Until recently most chromium coatings have been applied either by electrodeposition or chemical vapour deposition. Vacuum and powder‐coating techniques are breaking through in strip‐coating, and electrodeposition has also been investigated extensively since steel, having a thin ‘flash‐coating’ of chromium, can compete successfully with tin‐plate.

This content is only available via PDF.
© MCB UP Limited
1969
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$41.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
152 Views
2 Crossref
View Metrics
Regulation of phosphate coating growth on iron powders via interfacial reaction and ion diffusion for enhanced corrosion resistance and microwave absorption
Corrosion behavior of 316L stainless steel in electronic special semiconductor HCl gas: influence of temperature, partial pressure and water vapor
Influence of sputtering power on microstructure and corrosion properties of magnetron-sputtered TiZrNbTaMoW refractory high-entropy alloy films in marine environments
Effect of pH values on the hydrogen damage behavior of TC4 Ti alloy

Suggested Reading

Effect of diffusion chromising of austenitic alloys on their resistance to vanadium corrosion
Anti-Corrosion Manual (October,1968)
Kaizen: working responsively with psychopathic traits
Journal of Criminological Research, Policy and Practice (June,2018)
Aspects of intergranular corrosion of AISI 321 stainless steel in high-carbon-containing environments
Anti-Corrosion Methods and Materials (August,2014)
Portland pozzolana cement in India with respect to total chromium and hexavalent chromium content
Advances in Cement Research (July,2011)
Utilisation of by-product jarosite in the manufacture of ordinary Portland cement
Advances in Cement Research (February,2014)

Related Chapters

ENHANCED CHROMIUM CONFINEMENT BY BLENDING PFA WITH CEMENT
Challenges of Concrete Construction: Volume 6, Concrete for Extreme Conditions: Proceedings of the International Conference held at the University of Dundee, Scotland, UK on 9–11 September 2002
Reductive dissolution of metal oxides containing iron(III) and chromium(III) by complexes of vanadium(II) and chromium(ll)
WATER CHEMISTRY OF NUCLEAR REACTOR SYSTEMS 3
Experimental study on washing of coal fly ashes by water with carbon dioxide - washing effects on chromium (VI) and boron
5th ICEG Environmental Geotechnics: Opportunities, Challenges and Responsibilities for Environmental Geotechnics: Proceedings of the ISSMGE’s fifth international congress organized by the Geoenvironmental Research Centre, Cardiff University and held at Cardiff City Hall on 26–30th June 2006

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
CrossRef (2)
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal