Skip to Main Content
Article navigation
Volume 17, Issue 12
1 December 1970
This article was originally published in
Anti-Corrosion Manual
Anti-Corrosion Manual Cover Image for Volume 17, Issue 12
Review Article| December 01 1970

The oxidation of a number of chromized and chrome‐aluminized alloys in flowing air and flue gas atmospheres Available to Purchase

N.R. Chapman;
N.R. Chapman
Gas Council, Watson House, London
Search for other works by this author on:
This Site
PubMed
Google Scholar
B. Micklethwaite;
B. Micklethwaite
Gas Council, Watson House, London
Search for other works by this author on:
This Site
PubMed
Google Scholar
G.A. Pickup
G.A. Pickup
Gas Council, Watson House, London
Search for other works by this author on:
This Site
PubMed
Google Scholar
Author & Article Information
Publisher: Emerald Publishing
Online ISSN: 2977-7003
Print ISSN: 0066-4731
© MCB UP Limited
1970
Anti-Corrosion Manual (1970) 17 (12): 10–26.
https://doi.org/10.1108/eb006807

Summary A study has been made of the oxidation of a range of chromized and chrome‐aluminized alloys in flowing air and flue gas atmospheres in the temperature range 500°C—900°C. Oxidation data for the full range of alloys are given but only chromized and chrome‐aluminized mild steel are covered in depth.

This content is only available via PDF.
© MCB UP Limited
1970
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$41.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
144 Views
View Metrics
Regulation of phosphate coating growth on iron powders via interfacial reaction and ion diffusion for enhanced corrosion resistance and microwave absorption
Corrosion behavior of 316L stainless steel in electronic special semiconductor HCl gas: influence of temperature, partial pressure and water vapor
Influence of sputtering power on microstructure and corrosion properties of magnetron-sputtered TiZrNbTaMoW refractory high-entropy alloy films in marine environments
Effect of pH values on the hydrogen damage behavior of TC4 Ti alloy

Suggested Reading

Diffusion coatings on steel
Anti-Corrosion Manual (January,1978)
The oxidation of a number of chromized and chrome‐aluminized alloys in flowing air and flue gas atmospheres
Anti-Corrosion Manual (January,1971)
The effect of boronizing and boro‐chromizing on tribological performance of AISI 52100 bearing steels
Industrial Lubrication and Tribology (May,2009)
Metal Sprayers Guide to B.S. 5493
Anti-Corrosion Manual (January,1978)
The possibility of recycling flue dust of the ferrochromium productions in Kazakhstan
Management of Environmental Quality: An International Journal (December,2005)

Related Chapters

Pyrometallurgical purification of brass smelter furnace flue dust
The exploitation of natural resources and the consequences: The proceedings of GREEN 3: the 3rd International Symposium on Geotechnics Related to the European Environment held in Berlin, Germany, June 2000
Cement and Micro Silica Based Immobilisation of Different Flue Gas Cleaning Residues from MSW Incineration
Sustainable Waste Management: Proceedings of the International Symposium held at the University of Dundee, Scotland, UK on 9–11 September 2003
Galloping criteria for multi-flue coupled chimneys
Wind engineering: 1st IAWE European and African Regional Conference

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal