Skip to Main Content
Article navigation
Volume 19, Issue 9
1 September 1972
This article was originally published in
Anti-Corrosion Manual
Anti-Corrosion Manual Cover Image for Volume 19, Issue 9
Review Article| September 01 1972

THE THEORY OF STRESS CORROSION CRACKING IN ALLOYS

J.C. Scully
J.C. Scully
Department of Metallurgy; The Houldsworth School of Applied Science
Search for other works by this author on:
This Site
PubMed
Google Scholar
Author & Article Information
Publisher: Emerald Publishing
Online ISSN: 2977-7003
Print ISSN: 0066-4731
© MCB UP Limited
1972
Anti-Corrosion Manual (1972) 19 (9): 5–10.
https://doi.org/10.1108/eb006879

Introduction Stress corrosion cracking is a phenomenon that is of interest to a wide range of metal users. When it occurs under service conditions, often without any prior indication of impeding failure, its effect may be catastrophic.

This content is only available via PDF.
© MCB UP Limited
1972
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$41.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
731 Views
10 Crossref
View Metrics
Fabrication of a polydopamine-stearic acid coating on AZ31 magnesium alloy for enhanced corrosion resistance
Mechanistic insight into the corrosion inhibition behavior of a benzimidazolic derivative on C38 steel in hydrochloric acid
Polydopamine coating in Ti and TiO2 nanotubes and its potential use in commercial biomedical implants: surface characterization and corrosion resistance in a physiological solution
Enhancing the corrosion resistance of waterborne epoxy coatings using poly(sodium styrene sulfonate)-modified carbon nanotubes

Suggested Reading

Valuing “Raise Your Rate” certificates of deposit
Managerial Finance (September,2014)
A one point integrated assumed strain 4‐node Mindlin plate element
Engineering Computations (April,1990)
INFORMAL DISCUSSION. TRACK MAINTENANCE.
Proceedings of the Institution of Civil Engineers (February,1986)
Corrosion‐erosion behaviour of steel‐1, steel‐2, cast iron and polyurethane lined pipes for handling sand in mines
Anti-Corrosion Manual (November,1992)
The Reliability of Surface Mounted Solder Joints Under PWB Cyclic Mechanical Stresses
Circuit World (February,1986)

Related Chapters

Paper 36. Tensile and creep behavior of a new family of austenitic alloys: the double stabilized stainless steels
Materials for nuclear reactor core applications
Introduction: Disrupting Single Narratives Through The Power Of Story
Beyond Single Stories: Changing Narratives for a Changing World
Chapter 13 Seismic risk assessment and analysis
Engineering Geology of the Channel Tunnel

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
CrossRef (10)
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal