Skip to Main Content
Article navigation
Volume 24, Issue 3
1 March 1977
This article was originally published in
Anti-Corrosion Manual
Anti-Corrosion Manual Cover Image for Volume 24, Issue 3
Review Article| March 01 1977

Solving paint‐fog problems at Westland Helicopters Available to Purchase

Author & Article Information
Publisher: Emerald Publishing
Online ISSN: 2977-7003
Print ISSN: 0066-4731
© MCB UP Limited
1977
Anti-Corrosion Manual (1977) 24 (3): 19.
https://doi.org/10.1108/eb007030

Spraying helicopter cabin interiors has recently become a more popular job with paint shop operatives at Westland Helicopter's Yeovil factory.

This content is only available via PDF.
© MCB UP Limited
1977
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$41.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
113 Views
View Metrics
Preparation and protection study of silver coating on copper wave tube
Load-induced instability in tribocorrosion: contrasting behaviors of passive and non-passive steels in artificial seawater
Study on regional different erosion–corrosion behavior and mechanism of Ni1725–WxC laser clad coating under high temperature and pressure environment
A piperazine-based Mannich base as a dual-function inhibitor for L245 steel in simulated shale gas flowback water: corrosion inhibition and antimicrobial performance

Suggested Reading

£2m. Helicopter Transmission Test Rig Commissioned by Froude for Westland Helicopters
Aircraft Engineering (January,1983)
Westland Weighs Tilted Tanks
Aircraft Engineering (February,1992)
The Westland WG.13 Lynx: A brief description of the only international aerospace project in which Britain has leadership in design, production and sales
Aircraft Engineering (May,1971)
Advanced Design Rotor Blade Flown by Westland
Aircraft Engineering (September,1985)
Desitech CNC Ultrasonic Profiling Machine is the First Module in Westland Helicopters' New, Super‐Efficient Spar Production Cell
Aircraft Engineering (June,1986)

Related Chapters

I. Dublin City and District
Civil Engineering Heritage Ireland
Paper 8 DYNAMIC MEASUREMENTS ON AN EXPERIMENTAL HELICOPTER PLATFORM AND ON THE MOAT STREET FLYOVER, COVENTRY
CONFERENCE ON STRESSES IN SERVICE
Remedial works at Sutton Bingham Reservoir
Ensuring reservoir safety into the future: Proceedings of the 15th Conference of the British Dam Society at the University of Warwick from 10–13 September 2008

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal