Skip to Main Content
Article navigation
Volume 27, Issue 12
1 December 1980
This article was originally published in
Anti-Corrosion Manual
Anti-Corrosion Manual Cover Image for Volume 27, Issue 12
Review Article| December 01 1980

New coating combats “hot corrosion” in gas turbine buckets Available to Purchase

Author & Article Information
Publisher: Emerald Publishing
Online ISSN: 2977-7003
Print ISSN: 0066-4731
© MCB UP Limited
1980
Anti-Corrosion Manual (1980) 27 (12): 7.
https://doi.org/10.1108/eb007168

Scientists and engineers from General Electric Company of the USA's Research and Development Centre and Gas Turbine Division have come up with what they believe promises to be the best method yet devised for combating “hot corrosion” in gas turbine buckets—the scoop‐shaped airfoils that are spun by hot combustion gases, making the turbine rotate.

This content is only available via PDF.
© MCB UP Limited
1980
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$41.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
131 Views
1 Crossref
View Metrics
Preparation and protection study of silver coating on copper wave tube
Load-induced instability in tribocorrosion: contrasting behaviors of passive and non-passive steels in artificial seawater
Study on regional different erosion–corrosion behavior and mechanism of Ni1725–WxC laser clad coating under high temperature and pressure environment
A piperazine-based Mannich base as a dual-function inhibitor for L245 steel in simulated shale gas flowback water: corrosion inhibition and antimicrobial performance

Suggested Reading

On cyclic performance of suction bucket foundations in cohesionless soils
International Journal of Physical Modelling in Geotechnics (September,2024)
SPH method used for characteristic predictions at Pelton turbine buckets: comparing with the mesh-based method
Engineering Computations (July,2023)
Centrifuge modelling of drained pullout and compression cyclic behaviour of suction bucket
International Journal of Physical Modelling in Geotechnics (June,2019)
Observations during suction bucket installation in sand
International Journal of Physical Modelling in Geotechnics (February,2019)
Investigation on the installation and monotonic uplift performance of bucket foundation in clay
International Journal of Physical Modelling in Geotechnics (February,2025)

Related Chapters

CHAPTER XIV. CENTRIFUGAL AND OTHER LOW-LIFT PUMPS.
THE PRINCIPLES, CONSTRUCTION, AND APPLICATION OF PUMPING MACHINERY (STEAM AND WATER PRESSURE) With Practical Illustrations of Engines and Pumps applied to Mining, Town Water Supply, Drainage of Lands, etc. ; also Economy and Efficiency Trials of Pumping Machinery.
12. The effective deployment of bucket type dredgers
Maintenance dredging
“Water-Motors.”
THE THEORY AND PRACTICE OF HYDRO-MECHANICS.

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
CrossRef (1)
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal