Article navigation
Volume 28, Issue 1
1 January 1981
This article was originally published in
Anti-Corrosion Manual
Anti-Corrosion Manual Cover Image for Volume 28, Issue 1
Review Article| January 01 1981

Heat treatment, structure and properties of the corrosion‐resistant martensitic precipitation hardenable steel X5 CrNiMoCuNb 145 (14–5PH)

;
Publisher: Emerald Publishing
Online ISSN: 2977-7003
Print ISSN: 0066-4731
© MCB UP Limited
1981
Anti-Corrosion Manual (1981) 28 (1): 4–11.
https://doi.org/10.1108/eb010184

The parameters solution temperature, intermediate treatment and cooling rate (from high temperature and after tempering) were examined by statistical multiple factor analysis. Tempering temperature (200 to 650°C) and duration (4 to 64 h) were graded exhaustively.

This content is only available via PDF.
© MCB UP Limited
1981
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Pay-Per-View Access
$41.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
127 Views
1 Crossref

New and popular articles

Boundary-element analysis and experimental validation of cathodic protection potential distribution in intersecting branch pipelines
Corrosion behavior of long-term service-exposed ductile iron for water pipelines in chloride-containing media
Improving the resistance of DSS 2101 to hydrogen induced pitting through regulating hydrogen traps
Activated Ti surface breaking the galvanic immunity to Zn

Suggested Reading

A mechanism-based elasto-viscoplastic constitutive model for the creep deformation of martensitic heat-resistant steels
Engineering Computations (June,2024)
Pitting corrosion of super martensitic stainless steel 00Cr13Ni5Mo2
Anti-Corrosion Methods and Materials (October,2014)
Review of metal carbide nanoprecipitate effects on hydrogen embrittlement of high strength martensitic steel
Anti-Corrosion Methods and Materials (May,2022)
Effect of different nitriding processes on the friction coefficient of 304 austenitic and 420 martensitic stainless steels
Industrial Lubrication and Tribology (February,2013)
Effects of solution annealing and ageing treatments on the microstructure and mechanical properties of 17-4PH steel produced by binder jetting
Rapid Prototyping Journal (March,2025)

Related Chapters

PAPER 10 THE EFFECTS OF COMPOSITION AND OF STRUCTURE ON THE RESISTANCE TO STRESS CORROSION CRACKING OF STAINLESS STEELS
Effects of environment on material properties in nuclear systems
Failure of Roller Bearings on the Thelwall Viaduct
Forensic engineering: From failure to understanding: Proceedings of the two day international conference organised by the Institution of Civil Engineers and held in London on 2 to 4 December 2008
Paper 47. High temperature fracture of ferritic/martensitic steels and its relation to microstructure
Materials for nuclear reactor core applications

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
CrossRef (1)
This Feature Is Available To Subscribers Only

or Create an Account

Close subscription notice
Close access options