Coatings with outstanding chemical and physical properties can be obtained from two‐pack formulations without stoving. The epoxy resin was cured with different amine‐based compounds, such as polyamide (PA), the aniline copolymer of triethanolamine titanate and aniline formaldehyde. The thermal resistance properties of the cured films were analysed using the thermo‐gravimetric method. This study also examined the effect of coating resistance of 3 per cent sodium chloride solution by means of electrochemical impedance measurements. Coatings that included the epoxy triethanolamine titanate showed superior behaviour, compared to the other two systems tested. This hardener can be recommended instead of using conventional PA and polyamidoamide hardeners for epoxy two‐pack systems that are to be used to protect the steel structures from highly corrosive chemical and marine environments.
Skip Nav Destination
Article navigation
Research Article|
October 01 2004
Performance evaluation of different hardener for epoxy resin Available to Purchase
S. Sankar;
S. Sankar
Department of Industrial Chemistry, Alagappa University, Karaikudi, Tamil Nadu, India
Search for other works by this author on:
G. Paruthimal Kalaignan;
G. Paruthimal Kalaignan
Department of Industrial Chemistry, Alagappa University, Karaikudi, Tamil Nadu, India
Search for other works by this author on:
T. Vasudevan;
T. Vasudevan
Department of Industrial Chemistry, Alagappa University, Karaikudi, Tamil Nadu, India
Search for other works by this author on:
M. Selvaraj
M. Selvaraj
Central Electrochemical Research Institute, Karaikudi, Tamil Nadu, India
Search for other works by this author on:
Publisher: Emerald Publishing
Online ISSN: 1758-4221
Print ISSN: 0003-5599
© Emerald Group Publishing Limited
2004
Anti-Corrosion Methods and Materials (2004) 51 (5): 348–354.
Citation
Sankar S, Paruthimal Kalaignan G, Vasudevan T, Selvaraj M (2004), "Performance evaluation of different hardener for epoxy resin". Anti-Corrosion Methods and Materials, Vol. 51 No. 5 pp. 348–354, doi: https://doi.org/10.1108/00035590410554919
Download citation file:
Sign in
Don't already have an account? Register
ICE Member Sign In
Log inPurchased this content as a guest? Enter your email address to restore access.
Please enter valid email address.
Pay-Per-View Access
$41.00
Rental
This article is also available for rental through DeepDyve.
260
Views
Suggested Reading
Dow Corning issues guide to silane solutions
Anti-Corrosion Methods and Materials (December,2005)
New modified poly(ester amide) resins and their uses as a binder for surface coating with different applications
Pigment & Resin Technology (October,2020)
Synthesis and characterisation of new modified anti‐corrosive polyesteramide resins by partial replacement of the ingredient source of the polybasic acid for organic surface coatings
Pigment & Resin Technology (September,2012)
Preparation and characterisation of aluminium pigments encapsulated by composite layer containing organic silane acrylate resin and SiO2
Pigment & Resin Technology (May,2012)
DFT study of methoxy adsorbed on Ni-doped Cu (100) surface
Emerging Materials Research (June,2016)
Related Chapters
INNOVATIVE MATERIALS FOR CONCRETE—AN OVERVIEW
Achieving Sustainability in Construction: Proceedings of the International Conference held at the University of Dundee, Scotland, UK on 5–6 July 2005
Recommended for you
These recommendations are informed by your reading behaviors and indicated interests.
