Article navigation
Purpose

The purpose of this research paper was to investigate the use of methanolic extract of Salvia hispanica (S. hispanica) as a green corrosion inhibitor for bronze in a simulated acid rain solution.

Design/methodology/approach

Extract of S. hispanica was used as a green corrosion inhibitor for bronze in simulated acid rain solution. Electrochemical techniques such as potentiodynamic polarization curves, electrochemical impedance spectroscopy and electrochemical noise were used. Parameters such as polarization, charge transfer and noise resistance (Rp, Rct and Rn, respectively) were calculated.

Findings

Results showed that the extract acts as a good, anodic type of inhibitor. The inhibitor efficiency increased with increasing its concentration up to 400 ppm, decreasing beyond this concentration. Efficiency also increased with an increase in the immersion time. The inhibition was due to the adsorption of components found in the S. hispanica extract following a Langmuir adsorption isotherm.

Practical implications

S. hispanica extract can be used as a corrosion inhibitor for bronze in acid rain solution.

Originality/value

This study provides new information on the inhibition features of S. hispanica under specific conditions. This eco-friendly inhibitor could find applications to protect bronze exposed to polluted urban atmospheres.

Licensed re-use rights only
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Pay-Per-View Access
$41.00
Rental

or Create an Account

Close Modal
Close Modal