Genesys I an RGA for gas phase process control
Genesys I an RGA for gas phase process control
Keywords Analysts,ESS, Gas, Software
ESS (European Spectrometry Systems) has launched GeneSys I a residual gas analyser designed specifically for industrial gas phase process control.
Featuring fully automated instrument operation with process control interfacing, GeneSys I is said to be suitable for use in Zone II Control areas. A totally inert inlet is also fitted as standard. Application fields for GeneSys I include monitoring and process control of corrosive or explosive gas species.
Housed in a compact cabinet that incorporates all the required pumps (including the rotary pump),GeneSys I offers a specification level normally associated with larger and more expensive systems. And with its extremely compact dimensions, the instrument can be located immediately adjacent to the apparatus.
A key feature claimed of GeneSys I is its built-in modular sampling system, which provides eight sampling points as standard. When used in conjunction with ESS's separate "Navigator"unit, this system allows the number of sampling points to be easily increased in increments of eight, up to a maximum of 64 sampling units.
Incorporating advanced Windows software, GeneSys I offers a highly flexible user interface, with the provision for the default window layouts to be easily edited to the user's own preferences.
It thus enables all users to quickly become expert at setting up the system for optimum data acquisition.
Another "big system"feature claimed of GeneSys I is its ability to provide quantitative analysis,whilst RS232 or arcnet connection allows multiple stream operation from a single host, and over large distances.
Because data acquired from calibration routines is displayed in concentration levels rather than in pressure units it is that much easier to analyse. The display can show calibrated data as a bar graph, table or trend against time for up to 64 different components. Sequence fields can also be set up to provide full automation of inlets, vacuum system control, and pre-programming of software routines customised to a particular application.
It is believed that all GeneSys I users benefit from a high degree of after sales support, including free installation, 12 months on-site warranty (inclusive of data system) plus half day user orientation course.
Details from: European Spectrometry Systems. Tel: +44 (0)1606 49400; Fax: +44 (0)1606 330937; Website: http://www.essco.com; E-mail: 113150.2060@CompuServe.com
