... rights only Quinazolinone derivatives CO₂ corrosion L245N steel Quantum chemical calculations Molecular dynamic simulations Significant economic losses in the oil and gas industry are caused by equipment corrosion (Tamalmani and Husin, 2020 ; Raja et al., 2016...

... Emerald Publishing Limited 2025 Emerald Publishing Limited Licensed re-use rights only The general CO₂ corrosion behavior under flow conditions highly depends on the water chemistry and environment, while the local damage behavior is determined by the flow characteristics near...

... Limited 2025 Emerald Publishing Limited Licensed re-use rights only Figure 6 Microstructure of corrosion products of P110SS Figure 7 Microstructure of corrosion products of 2205 DSS P110SS corrosion 2205 DSS corrosion Oil wellbore extreme condition CO₂ corrosion...

... to improve the oil recovery (Wright et al., 2018 ; Tian et al., 2017 ; Mansoori et al., 2018 ; Liu et al., 2016). Therefore, CO₂ corrosion of pipeline steel is an inevitable problem in the petrochemical industry. Although alloy steel could be used instead...

... pipeline steel. The weight loss tests were carried out in a 3 L autoclave, and effects of water cut and temperature on the CO₂ corrosion rate of X65 steel were studied. Electrochemical studies were carried out in a three-electrode electrochemical cell with the test temperature was 60°C...

...Jhonatan Jair Arismendi Florez; Jean Vicente Ferrari Purpose Among the many influencing effects that the medium has on the CO₂ corrosion of carbon steel, flow is one of the most important because it can determine the formation of corrosion product scales and its stabilisation, thus...

... out in a 3L autoclave, and effects of flow velocity, CO₂ partial pressure and water cut on the CO₂ corrosion rate of X65 steel were studied. Electrochemical studies were carried out in a three-electrode electrochemical cell with the test temperature of 60°C and CO₂...

... products layer forms, and it is periodic. Mechanism CO₂ corrosion 20# Seamless steel Corrosion products’ characteristics Stratified flow At different corrosion times, a brown or puce layer is formed on the sample surface, and Figure 2 shows the micro-appearance of samples...

... of gathering pipeline steel. The weight loss tests were carried out in a 3L autoclave, and effects of temperature, CO₂ partial pressure, water cut and flow velocity on the CO₂ corrosion rate of API X65 pipeline steel were studied. Electrochemical studies were carried out in a three...

... consisted of three parallel samples. Steel CO₂ corrosion Inhibitor concentration Localised corrosion National Science & Technology Pillar Program 2012BAK13B04 Carbon steels are widely used as tubing or pipeline in oil and gas industries, and may suffer from severe...

... it can be calculated by Dalton’s law for partial pressures, which is shown as equation (7): CO₂ partial pressure is one of the main factors of the CO₂ corrosion, so calculating CO₂ partial pressure correctly is important for downhole tubing anticorrosion design...

.... Approximately 60 per cent of the failures in oilfields are related to CO₂ corrosion. This failure mechanism is related mainly to the low corrosion resistance of carbon steel and to lack of predictive models (Kermani, 1997). CO₂ corrosion has been reported as the most prevalent form...

...Z.F. Yin; X.Z. Wang; R.M. Gao; S.J. Zhang; Z.Q. Bai Purpose This paper aims to further investigate the behavior and mechanism in simulated oilfield solution on CO₂ corrosion of P110 steel at various temperatures by potentiodynamic sweep and electrochemical impedance spectroscopy (EIS...