...Renjun Luo; Jihui Wang; Wenbin Hu Purpose This study aims to fabricate an efficient hydrophobic anticorrosion coating in situ on Q235 steel by combining electrodeposition with hydrophobic surface modification, and to clarify its corrosion protection mechanism. Design/methodology...

... shift of over 400 mV for carbon steel. Thus, the composite films exhibit more excellent photocathodic protection performance than single α-Fe₂O₃ films, providing a new effective approach for carbon steel corrosion protection. 24 10 2025 24 12 2025 12 01 2026 ©...

...Tahere Miri; Davod Seifzadeh; Burak Dikici; Farough Nasiri; Roghayeh Hosseininia Purpose The purpose of this study is to improve the corrosion protection of epoxy coating on ST37 steel through chemical interaction by incorporating NH2-MIL-53(Al), a metal-organic framework (MOF), as a nanofi ler (1...

...Zhengwei Song; Zhi-Hui Xie; Lifeng Ding; Shengjian Zhang Purpose This paper aims to comprehensively review the preparation methods of superhydrophobic surfaces (SHPS) for corrosion protection of Mg alloy in recent years. Design/methodology/approach The preparation methods, wettability...

... in corrosion protection. In this paper, a Ni-based SHPC was prepared on the surface of copper (Cu) to enhance its corrosion resistance. Design/methodology/approach The coating was prepared through a two-step electrodeposition process. The first step involves the formation of a micro-nano structure Ni layer...

... and provides new ideas and directions for future research. Gallic acid Corrosion inhibitor Rust conversion Nanomaterials Resin material Corrosion protection Gallic acid (3,4,5 trihydroxy benzoic acid) is a yellowish-white crystalline phenolic compound with the chemical formula...

... nanocomposites were mixed with acrylic resin through a solution mixing method and the composites were coated onto the surface of mild steel. Electrochemical measurements were used to determine the corrosion protection efficiency (P.E.%) of polymer composite coatings using 3.5% NaCl solution as corrosion...

...José Conde-Nicho; María Elena Nicho; José Alfredo Rodríguez; Ulises León-Silva; José María Rodríguez-Lelis Purpose This paper aims to study the corrosion protection of 410 stainless steel (410SS) cracked by fatigue tests. The purpose of this study is to show that using polymeric coatings...

... ; Sørensen et al., 2009 ; Kalendova et al., 2006). Iron alloys (steel, cast iron), which represent the largest proportion of the metals used for construction purposes are very vulnerable to corrosion and, consequently need corrosion protection. Electrochemical corrosion is the most...

... 06 05 2019 21 05 2019 © Emerald Publishing Limited 2019 Emerald Publishing Limited Licensed re-use rights only Electrochemistry Mild steel Tannic acid Corrosion protection Cooling systems Polyaspartic acid Weight loss SEM-EDX FTIR Corrosion reduction...

... on the improvement of corrosion-resistant performance. Design/methodology/approach A series of hybrid sol-gel films incorporated with varying amounts of TiO2 nanosheets were developed to enhance the corrosion protection performance of the bare metal. Scanning electron microscopy, transmission electron microscopy...

... Electrochemical characterization of cured EBAC, EBAC-M, EBAC-Z and EBAC-Ce coated samples was undertaken to evaluate the corrosion resistance properties of the modified polydimethylsiloxane coatings. EIS Carbon steel Amine Corrosion protection Epoxy Polydimethylsiloxane The protection...

... (shown as an example) showed a regular nonporous coated surface without cracks, and the EDS analysis on this coating indicated that the main element present in it are Si, O and C (Figure 2). Epoxy Amine Polydimethylsiloxane Corrosion protection Carbon steel EIS. The protection...

... and subsequent delamination. The polarization curves, EOCP and impedance measurements showed that PPy undoped/Al₂O₃ layers show promise as good candidates for the corrosion protection of reactive metals. Originality/value – This paper presents that electrodes coated with undoped PPy...

... corrosion in Mauritius. © Emerald Group Publishing Limited 2013 Mauritius Atmospheric corrosion Corrosion protection Corrosion prevention Cost of corrosion Coatings Mauritius is a small tropical island found in the Indian Ocean, as shown in Figure 1 , which experiences...

.... Spathis can be contacted at: spathis@chem.auth.gr © Emerald Group Publishing Limited 2013 Alloys Stress corrosion Corrosion protection Aluminium Anodic coatings Sulphate compounds The stress corrosion cracking (SCC) behaviour of aluminium alloys in aqueous environments...

...Mohammad Naser Kakaei; Iman Danaee; Davood Zaarei Purpose The aim of this paper is to study the corrosion protection behavior of water‐borne inorganic zinc‐rich coatings based on potassium silicate/nanosilica developed with various zinc and micaceous iron oxide (MIO) contents during cathodic...

... Corrosion protection The cathodic protection of marine structures is performed by means of sacrificial anodes, impressed current systems or using hybrid systems consisting of a combination of the two. Cathodic protection current flows from the anode via the electrolyte to the surface...

... spray environment was concerned. Figure 2 Images of the samples after salt spray corrosion test A. Akinci can be contacted at: akinci@sakarya.edu.tr © Emerald Group Publishing Limited 2011 Sealing materials Coatings Corrosion protection Steel A common phenomenon...

... cm²), indicating increased corrosion protection. Research limitations/implications This coating had improved barrier protection but lacked cut edge protection. Future work will focus on adding sacrificial protection by introducing compatible corrosion inhibitors, especially dye molecules, which...