... Gökhan Özer ozergokhan@gmail.com 24 02 2025 16 05 2025 28 06 2025 04 07 2025 © 2025 Emerald Publishing Limited 2025 Emerald Publishing Limited Licensed re-use rights only AlSi10Mg Electrochemical corrosion Additive manufacturing (AM) New T6 heat treatment (NT6...

... of the electrochemical corrosion reaction, consequently reducing the corrosion rate. Originality/value This study elucidates and quantifies the intrinsic relationship between microstructure, GBCD and corrosion rate. This understanding is crucial for enhancing the corrosion resistance of weathering bridge steels...

... of the MAO coating of 7075 aluminum alloy. Micro-arc oxidation 7075 aluminum alloy Nano-SiO₂ particle Electrochemical corrosion The 7075 aluminum alloy, an Al-Zn-Mg-Cu alloy, is characterized by high specific strength, high hardness, low density and excellent machinability...

... oxidation MoS2 particles Electrochemical corrosion Corrosion Electrochemistry Materials The scanned visuals of the coating’s surface for every specimen group are displayed in Figure 3 . It is notable that the spread of Mg, O, F and P elements is denser, as these four elements form the core...

...Zhenyu Ma; Yupeng Zhang; Xuguang An; Jing Zhang; Qingquan Kong; Hui Wang; Weitang Yao; Qingyuan Wang Purpose The purpose of this study is to investigate the effect of nano ZrC particles on the mechanical and electrochemical corrosion properties of FeCrAl alloys, providing a beneficial reference...

... at: hujunying01@yeah.net 26 12 2022 18 02 2023 20 02 2023 © Emerald Publishing Limited 2023 Emerald Publishing Limited Licensed re-use rights only SRB H₂-doped natural gas Electrochemical corrosion The specimens were machined into slices with a diameter...

... MAO Microstructure Recrystallization Electrochemical corrosion Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) were designed to investigate the corrosion resistance of MAO coatings. The electrochemical tests were performed in three-electrode cells in 3.5 Wt...

... fluoride Electrochemical corrosion 7075 aluminum alloy is widely used in the fields of aviation and sports equipment as an important high-strength structural material due to its advantages of low density, strong toughness and good welding performance (Kong et al., 2015 ; Cai et al...

...Rou Li; Changqing Miao; Tinghua Wei Purpose This paper aims to investigate the electrochemical corrosion rate of galvanized steel wires for bridge cables. Design/methodology/approach The electrochemical corrosion test and response surface analysis of galvanized steel wires were carried out...

...Wei Luo; Lei Hu; Yimin Xv; Jian Zhou; Wentao Xv; Mi Yan Purpose This paper aims to focus on an assessment of the electrochemical corrosion performance of bulk NC copper in a variety of corrosion environments. Design/methodology/approach The electrochemical corrosion behavior of bulk...

...Kong Dejun; Chen Haixiang Purpose The purpose of this paper is to investigate the effects of laser power on the electrochemical corrosion performance in 3.5% NaCl, 0.1 M H₂SO₄ and 0.1 M NaOH solutions, which provided an experimental basis for the application of Al–Ti–Ni...

...Kong Dejun; Li Jiahong Purpose The purpose of this paper is to evaluate the salt spray corrosion (SSC) and electrochemical corrosion performances of CrNi, TiAlN/NiCr and CrNi–Al₂O₃–TiO₂ coatings on H13 steel, which improved the corrosion resistance of H13 hot work...

...Zhou Weitong; Kong Dejun Purpose This paper aims to enhance the corrosive wear and electrochemical corrosion of Ti–6Al–4V alloy. Design/methodology/approach A CoCrAlYTaSi alloy coating was fabricated on Ti–6Al–4V alloy using a laser thermal spraying (LTS). The surface and cross-section...

...Xiaoxiao Liu; Dejun Kong Purpose This study aims to investigate the salt spray corrosion (SSC) and electrochemical corrosion of obtained Zn–Al coating, which provided a basis for comprehensive analysis of corrosion behavior of Zn–Al coating. Design/methodology/approach A Zn–Al coating...

...Li Jiahong; Kong Dejun Purpose The purpose of this paper is to improve the salt spray corrosion and electrochemical corrosion performances of H13 hot work mould steel, Cr–Ni coatings with the different Cr and Ni mass ratios are fabricated using a laser cladding (LC), which provides an experimental...

...Zhang Jing; Kong Dejun Purpose To improve the electrochemical corrosion resistance of cold sprayed Al coating. Design/methodology/approach A cold sprayed aluminum (Al) coating fabricated on S355 structural steel was oxidized using a micro arc oxidation (MAO). The electrochemical corrosion...

...Jiamei Wang; Le Fu Zhang Purpose The purpose of this study was to investigate the effects of deformation-induced martensite on electrochemical corrosion behaviors of 304 austenitic stainless steel in a simulated primary water environment of a pressurized water reactor nuclear power plant...

...Ehsan Saebnoori; Taghi Shahrabi; Alireza Sabour Rouhaghdam; Majid Jafarian Purpose The purpose of this paper is to investigate the effect of thermal treatment at low partial pressure of oxygen on electrochemical corrosion resistance of Ti‐47Al‐2Cr (at %) intermetallic, known as γ‐TiAl alloy...

... with temperature increases. Z.F. Yin can be contacted at: yinzhifu919@sohu.com © Emerald Group Publishing Limited 2011 CO₂ corrosion Temperature EIS Corrosion film Coverage fraction Electrochemical corrosion Carbon dioxide corrosion can be defined as the attack of metal...

...Yan Jun Xi; Yong Jun Liu; Zhi Xin Wang; Jin Bin Liu Purpose The purpose of this paper is to investigate the high‐temperature oxidation behavior in air at 900‐1,000°C and electrochemical corrosion performance in 3.5 percent NaCl solution of Ti‐24Al‐17Nb‐0.5Mo (at. %) alloy with Ti‐48Al‐8Cr‐2Ag...