...Tingyi Chen; Yaqi Ma; Hongtao Zhu; Qiming Huang Purpose The purpose of this study is to prepare trivalent chromium conversion (TCC) film on the Zn-Ni electrodeposited film on the surface of 2024 aluminum alloy and to ensure that the TCC film has good corrosion resistance and electrical...

...Deng Shu‐hao; Gong Zhu‐qing The corrosion behaviour of pulse plating nanocrystalline iron‐nickel‐chromium (Fe‐Ni‐Cr) alloys in acidic, alkaline and salt solutions has been studied. The corrosion resistance of nanocrystalline Fe‐Ni‐Cr alloys in various compositions and other nanocrystalline referred...

... coating was prepared and its chemical resistance properties in acid, alkali and neutral solutions were studied. Different combinations of these three binders were also prepared in toluene:acetone solvent mixture and the chemical resistance properties of these PPCs were evaluated in comparison...

...Jyoti Lata Pandey; M.K. Banerjee The development of high‐temperature, oxidation‐resistant coatings needs to be thoroughly studied owing to the metal loss incurred from short‐ or long‐term exposure to high temperatures before final processing. Particularly, short‐term exposure (intermittent heating...

... in which the pitting resistance equivalent should be used. Tests have been carried out in electrolyte‐simulating conditions in the purified gas zone of the wet flue‐gas desulphurization units. On the basis of the experimental data, determines flexibility for pitting corrosion of investigated materials. ©...

... paint formulations. Physical, chemical and mechanical properties of the formulated paint films were studied and also tested for corrosion resistance. Finds that zinc ferrite is a basic pigment and can be recommended for use in anti‐corrosive paints. High corrosion‐resistant coatings can be obtained...

... technique, UV‐visible, FTIR and luminescence spectra. Found that the protective film consists of FE²⁺‐ATMP complex, Fe²⁺‐PAA complex and Zn(OH)₂. © MCB UP Limited 1997 Coating Corrosion Resistance Steel The adsorption behaviour of polyacrylamide (PAA...

...M.N. Singh; Inder Singh; J.L. Pandey Relates to the development of high temperature resistant coating applicable in the temperature range of 500°C to 700°C. A1₂O₃, TiO₂ and ZrO₂ have been incorporated in aluminium phosphate and ivory‐400 used as binders...

...Jean‐Louis Pey The wide range of steel pipe sections with complex geometry, as well as that of their cast iron components (fittings, valves and pumps) poses a real problem to installation designers who must achieve a consistent level of long‐term corrosion resistance. In that case, Rilsan...

...Lydia M. Storojeva Comparative investigations of the corrosion resistance of different coated sheet steels in various fuel mixtures were carried out. Corrosion resistance has been studied on the following materials: Neuratern (electrolytically deposited terne‐coated steel, Thyssen Stahl AG, Germany...