...Ruirui Mao; Qian Zhao; Jie Zhang Zhang; Chunhui Miao; Yafei Bian; Wenming Tang Purpose This study aims to investigate the stress corrosion behavior and mechanism of the galvanized layer on steel structures commonly used in power grid equipment in the simulated industrial pollution environment...

... grains have better corrosion resistance. AZ31 magnesium alloy Annealing Micro-arc oxidation Stress corrosion National Natural Science Foundation of China 51871031 Due to its excellent properties, such as low density, high specific strength and high specific stiffness, magnesium...

...> at the microcrack tip) indicates that fine grains may be beneficial in hindering crack propagation. Originality/value The principal mechanism for the corrosion failure is supposed to be due to the interaction of chloride ions with the sulfate-reducing microorganisms present and the stress corrosion cracking...

...Yanbao Guo; Zhenyuan Liu; Hui Huang; Deguo Wang; Renyang He Purpose The corrosion of buried steel pipelines is becoming more serious because of stress corrosion, stray current corrosion and other reasons. This paper aims to study the various alternating current (AC) interference densities...

...R.G. Song; T.S. Hua; Y. Zong; S.W. Cai Purpose This paper aims to study the effect of Micro-arc oxidation (MAO) coating on stress corrosion and electrochemical behavior of aluminum alloy. Design/methodology/approach The stress corrosion cracking behavior of 7050 aluminum alloy (AA7050) after...

...P. Spathis; E. Papastergiadis Purpose The purpose of this paper is to study the stress corrosion cracking (SCC) behaviour of anodized 1050 Al‐alloy in marine environments at different concentrations of sulphate ions. Design/methodology/approach The SCC experiments were performed by measuring...

...Jian Li; Gang Du; Chen Jiang; Shijiu Jin Purpose The purpose of this paper is to classify and identify the acoustic emission (AE) signals of 304 stainless steel during stress corrosion process. Design/methodology/approach The corrosion behavior of a specimen during slow strain rate testing...

... with constant load in acidic NaCl solution was studied, and the AE signal characteristics of the corrosion process were analyzed. Stress corrosion cracking of the specimen was detected using the AE and electrochemical noise (EN) techniques, and the acquired data were compared. Findings The results indicated...

...A. Almubarak; M. Belkharchouche; A. Hussain Purpose The purpose of this paper is to investigate stress corrosion cracking (SCC) for 304, 316, and 321 stainless steels in petroleum‐processing environments. Design/methodology/approach Sensitized austenitic stainless steels were subjected...

.... The results of early‐published papers on boiler corrosion (testing in FeCl₂ solutions), erosion corrosion (testing in wet steam at 20 bar), nitrate stress corrosion cracking (testing in NH₄NO₃ solutions) and SICC together with those originating from in‐service failures, were...

... the physicochemical properties of Gulf of Mexico seawater, which were measured daily. Results obtained from the sensitisation test, carried out on the CF S31603 SS specimens indicated that the steel was not sensitised. Stress corrosion Noise Stainless steel Seawater Extensive development...