... and linings Electrochemistry Materials Corrosion science National Natural Science Foundation of China No. 52271074 Graduate Innovation Fund of Xi’an Shiyou University YCX2513149 The authors acknowledge the support from the National Natural Science Foundation of China (Grant...

... influencing material degradation. The review synthesizes recent advancements in corrosion control methods and outlines targeted future research directions to enhance system durability, with a particular emphasis on synergistic damage mechanisms and the integration of monitoring and predictive technologies...

... Emerald Publishing Limited Licensed re-use rights only ZK60 magnesium alloy Micro-arc oxidation MoS2 particles Electrochemical corrosion Corrosion Electrochemistry Materials The magnesium alloy exhibits a plethora of advantages, including its low specific gravity, excellent damping...

... be contacted at: drjosephrajxavier@gmail.com 28 06 2020 22 05 2021 24 05 2021 © Emerald Publishing Limited 2021 Emerald Publishing Limited Licensed re-use rights only Electrochemistry Materials Marine %A0 Corrosion science Nanocomposite Failure investigation...

..., their susceptibility to crevice corrosion when coupled with CFRP is a new challenging topic that needs further investigation. This is very important today because the vast application witnessed for CFRP material. This work involves developing an original methodology for this kind of investigation and was done...

... at: zhang200622072@163.com 28 01 2020 30 05 2020 15 07 2020 © Emerald Publishing Limited 2020 Emerald Publishing Limited Licensed re-use rights only Corrosion Materials When carbon steel is exposed in atmosphere, an air-formed oxide film with a porous microstructure...

... > S₇ > S₃ > S₄. Friction stir processing Optical microscopy Corrosion rate Passive film Debonding Surface preparation Materials Composites Metallurgy Manufacturing of the automotive monocoque (body in white) indeed requires specific properties...

... Emerald Publishing Limited 2019 Emerald Publishing Limited Licensed re-use rights only Corrosion Materials Concrete Inhibitors Mitigation and prevention Concrete is an extraordinary and key structural material ever created in the human history. It is most widely used construction...

... Publishing Limited Licensed re-use rights only Corrosion materials High temperature Coatings and linings Figure 4 shows mass gain as a function of the oxidation cycle. It can be seen that mass gains of the aluminised cast irons were considerably lower than that of the bare cast iron...

...Sarbjit Kaur; Niraj Bala; Charu Khosla Purpose The biomaterials are natural or synthetic materials used to improve quality of life either by replacing tissue/organ or assisting their function in medical field. The purpose of the study is to analyze the hydroxyapatite (HAP), HAP-TiO₂ (25...

..., according to the ASTM requirements, was rated from 0B to 5B (from low to high adhesion, respectively). The pull-off adhesion test was performed by using a portable pull-off testing apparatus (Positest AT-M by Defelsko). Corrosion Coatings and linings Materials Magnesium alloys, thanks...

... Publishing Limited Licensed re-use rights only Corrosion Microscopy Surface preparation Materials Coatings and linings The chemical composition of carbon steel and the galvanizing bath is an important factor affecting the properties and the microstructure of the hot-dip galvanized layers...

..., sour corrosion, galvanic corrosion and microbiologically induced corrosion. Also, the effects of environmental and material factors on the corrosion rate are presented. Subsequently, current technology of mitigating these corrosion problems has been discussed, including the development of materials...

... change per unit area is calculated to study the corrosion kinetics and also the influence of salt mixture. Further, the samples are analysed through materials characterisation techniques using optical image, scanning electron microscope (SEM), energy dispersive X-ray (EDAX) and X-ray diffraction (XRD...

... must be declared. 6. If accepted, the article will not be published elsewhere in the same form, in any language, without the written consent of the publisher. SCs are high-performance thermoplastic composite materials made of sulfur as a binder and technical soot as a filler, at temperature above...

... exists on the surface Appearance grade 5 4 3 2 1 06 03 2015 12 05 2016 24 05 2016 24 05 2016 © Emerald Publishing Limited 2017 Emerald Publishing Limited Licensed re-use rights only Coatings and linings Surface preparation Materials Corrosion...

.... It shows that solution recipes least harmful to the steel vessels can be outlined for various reactive or other types of dye groups. Corrosion Inhibitors Materials Pitting Chlorine ion used in reactive dyeing processes promotes a decent dyeing quality via exerting coulombic force to drive...

..., the nonlinear characteristics of interaction between media or damage and ultrasound when ultrasound propagates in the structure are used for IGC evaluation. It was found that for isotropic homogeneous materials, where there was no damage or other features, the nonlinear acoustic was affected only...

... Zr₅₉Nb₃Al₁₀Ni₈Cu₂₀ alloy leads to the improvement in the corrosion behavior in nitric acid medium at room temperature. Originality/value – The results can be helpful in finding the suitable material for fuel reprocessing applications. © Emerald Group Publishing Limited 2016 Austenitic stainless steel...

... engineering Materials Buildings and/or civil structures Concrete Because concrete has good versatility and relatively low cost, it has been used in man-made building materials in the world. At the same time, concrete is also a unique composite material that is porous and highly heterogeneous...