Skip to Main Content
Article navigation
Volume 61, Issue 3
1 March 1989
This article was originally published in
Aircraft Engineering
Aircraft Engineering Cover Image for Volume 61, Issue 3
Review Article| March 01 1989

Ultrasonic Process Shapes Ceramics and Other Hard Materials

Author & Article Information
Publisher: Emerald Publishing
Online ISSN: 2059-9366
Print ISSN: 0002-2667
© MCB UP Limited
1989
Aircraft Engineering (1989) 61 (3): 10–11.
https://doi.org/10.1108/eb036759

PRECISE shapes can be machined into ceramics, glass and other hard materials by Mafell equipment. The process employed is US‐erosion, otherwise known as ultrasonic machining. Mafell Ultrasonics GmbH, a West German company, has devoted much development work to making the process a practical method of manufacturing, with many potential applications in industry.

This content is only available via PDF.
© MCB UP Limited
1989
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$39.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
122 Views
View Metrics
Development and validation of a perceived aviation risk scale: evidence from public samples
Dynamic energy harvesting in unpowered flight: empirical flight mechanics and aerodynamic design implications
Integrated design method of aircraft RBF neural network-based fault diagnosis and nonlinear dynamic inversion control
A comparative analysis of YOLO lightweight models for foreign object detection at airports

Suggested Reading

Surface damage during ultrasonic consolidation of 3003‐H18 aluminum
Rapid Prototyping Journal (January,2010)
Transient thermal response in ultrasonic additive manufacturing of aluminum 3003
Rapid Prototyping Journal (August,2011)
Review of recent trends in ultrasonic additive manufacturing: current challenges and future prospects
Rapid Prototyping Journal (January,2023)
Enabling internal electronic circuitry within additively manufactured metal structures – the effect and importance of inter-laminar topography
Rapid Prototyping Journal (January,2018)
Investigation of ultrasound-assisted soldering of SiC ceramics by using Zn-Al-In solder for high-temperature applications
Soldering & Surface Mount Technology (April,2022)

Related Chapters

Ultrasonic sensor system for automatic depth measurement of surface opening cracks in concrete by means of a robotic arm
Transforming the Future of Infrastructure through Smarter Information: Proceedings of the International Conference on Smart Infrastructure and ConstructionConstruction, 27–29 June 2016
Design of Wild Animal Detection and Rescue System with Passive Infrared and Ultrasonic Sensor based Microcontroller
Proceedings of MICoMS 2017
Ultrasonic Cleaning of Clogged Geosynthetic Drain
5th ICEG Environmental Geotechnics: Opportunities, Challenges and Responsibilities for Environmental Geotechnics: Proceedings of the ISSMGE’s fifth international congress organized by the Geoenvironmental Research Centre, Cardiff University and held at Cardiff City Hall on 26–30th June 2006

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal