The purpose of this paper is to investigate the knock combustion characteristics, including the combustion pressure, heat release rate (HRR) and knock intensity of aviation kerosene fuel, that is, Rocket Propellant 3 (RP-3), on a port-injected two-stoke spark ignition (SI) engine.
Experimental investigation using a bench test and the statistical analysis of data to reflect the knock combustion characteristics of the two-stroke SI unmanned aerial vehicle (UAV) engine on RP-3 kerosene fuel.
Under the full load condition of 4,000 rpm, at the ignition timing of 25 degree of crank angle (°CA) before top dead centre (BTDC), the knock combustion is sensitive to the thinner mixture; therefore, the knock begins to occur when the excess air ratio is larger than 1.0. When the excess air ratio is set as 1.2, the knock obviously appears with the highest knock intensity. At the excess air ratio of 1.2, better engine performance is obtained at the ignition timing range of 20-30 °CA BTDC. However, the ignition timing at 30° CA BTDC significantly increases the peak combustion pressure and knock intensity with the advancing heat release process.
Gasoline has a low flash point, a high-saturated vapour pressure and relatively high volatility, and it is a potential hazard near a naked flame at room temperature, which can create significant security risks for its storage, transport and use. The authors adopt a low-volatility single RP-3 kerosene fuel for all vehicles and equipment to minimise the number of different devices using various fuels and improve the military application safety.
Most two-stroke SI UAV engines for military applications burn gasoline. A kerosene-based fuel for stable engine operation can be achieved because the knock combustion can be effectively suppressed through the combined adjustment of the fuel amount and spark timing.
