Skip to Main Content
Article navigation
Volume 13, Issue 2
1 February 1941
This article was originally published in
Aircraft Engineering
Aircraft Engineering Cover Image for Volume 13, Issue 2
Review Article| February 01 1941

Torsion in Rectangular Channels: A Means of Quick Determination of Maximum Stresses in Open Sections Subjected to End Restraint

H.J.M. Kittelsen, D.I.C., B.Sc.
H.J.M. Kittelsen, D.I.C., B.Sc.
Search for other works by this author on:
This Site
PubMed
Google Scholar
Author & Article Information
Publisher: Emerald Publishing
Online ISSN: 2059-9366
Print ISSN: 0002-2667
© MCB UP Limited
1941
Aircraft Engineering (1941) 13 (2): 40–41.
https://doi.org/10.1108/eb030738

This article is intended, firstly, as a means to a quick determination of the maximum stresses in such a channel, and secondly, to give the reader a clearer insight into the behaviour of an open section generally.

This content is only available via PDF.
© MCB UP Limited
1941
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$39.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
91 Views
View Metrics
A hybrid IDBO-BP-NN model considering work-hardening for surface roughness prediction in two-step milling of GH4169 superalloy
Virtual reality assessment of cockpit ınstrument panel ergonomics: analyzing the relationship between layout philosophy and operational efficiency
Development of a rectifier grille to improve flow-field uniformity by mitigating wake vortices in rotating-arm wind-tunnel apparatus
Modeling and simulation analysis of an airship’s leveling process during non-forming ascent

Suggested Reading

Torsion of a Constrained Rectangular Box Section: An Experimental Investigation of the Stresses due to Torsion in a Rectangular Box Section with one end Constrained
Aircraft Engineering (February,1954)
Shear and torsion in prestressed hollow core units: finite element analyses of full-scale tests
Structural Concrete (June,2007)
An elastic theory for the torsional strength of rectangular reinforced concrete beams
Magazine of Concrete Research (July,1950)
Torsional stiffness of reinforced concrete rectangular members
Magazine of Concrete Research (December,1979)
Torsion of Tapered Tubes: Effect of Various Parameters on the Stiffness of Axially Constrained and Free Ended Tapered Rectangular Tubes
Aircraft Engineering (April,1939)

Related Chapters

Study of edge restraints and localized weakness in the double layer grids of square and rectangular layouts
Space Structures 5
TORSIONAL STRENGTH OF STEEL FIBROUS CONCRETE
Application of Codes, Design and Regulations: Proceedings of the International Conference held at the University of Dundee, Scotland, UK on 5–7 July 2005
EFFECT OF LONGITUDINAL STEEL OR RCC MEMBERS UNDER TORSION
Challenges of Concrete Construction: Volume 6, Concrete for Extreme Conditions: Proceedings of the International Conference held at the University of Dundee, Scotland, UK on 9–11 September 2002

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal