Article navigation
Volume 15, Issue 1
1 January 1943
This article was originally published in
Aircraft Engineering
Aircraft Engineering Cover Image for Volume 15, Issue 1
Review Article| January 01 1943

Tools for the Workshop

Publisher: Emerald Publishing
Online ISSN: 2059-9366
Print ISSN: 0002-2667
© MCB UP Limited
1943
Aircraft Engineering (1943) 15 (1): 26–28.
https://doi.org/10.1108/eb030984

The Kendal & Gent C.V.M. 65 vertical milling machine is similar in design to the C.V.M. 40, produced by the same firm, except that its capacity is larger and the spindle motor is vertically mounted on the spindle head.

This content is only available via PDF.
© MCB UP Limited
1943
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Pay-Per-View Access
$39.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
143 Views

New and popular articles

Kriging-assisted full-envelope ADRC gain scheduling for fixed-wing UAVs
An AHP-fuzzy FMEA and bow-tie barrier approach for maintenance risk assessment of outdoor-parked general aviation aircraft
Bottom-up computational design of a hybrid tricopter agricultural spray UAV: propeller, nozzle, tank and airframe CFD optimization
Agricultural waste to aircraft interiors: mechanical, dynamic mechanical and durability characteristics of rice husk-reinforced composites based on waste polyethylene terephthalate

Suggested Reading

Pixel‐based airborne hyperspectral sensing technique for search‐and‐rescue of the missing RMAF NURI helicopter in Genting‐Sempah, Malaysia
Disaster Prevention and Management: An International Journal (February,2010)
Learning to work with interdependencies effectively: the case of the HRM forum of the suppliers teams at Volvo Cars Gent
Supply Chain Management: An International Journal (March,2010)
Chief ‘Ntrepreneur Officers (CNOs): American Sam Ginn and Britisher Chris Gent, in high‐risk (PRINT),high‐returns decisions creating a wireless world, 1984‐2000
Management Research News (March,2004)
Tools for the Workshop
Aircraft Engineering (February,1952)
Tools for the Workshop
Aircraft Engineering (July,1961)

Related Chapters

Riprap stability for deep water, shallow water and steep foreshores
Coasts, marine structures and breakwaters: Adapting to change: Proceedings of the 9th international conference organised by the Institution of Civil Engineers and held in Edinburgh on 16 to 18 September 2009
Modelling of open filters under wave loading
Coasts, Marine Structures and Breakwaters 2017
A VIBRATIONLESS TRAM-BUSWAY IN CONTINUOUSLY REINFORCED CONCRETE WITH COLOURED SURFACE
Concrete for Transportation Infrastructure: Proceedings of the International Conference held at the University of Dundee, Scotland, UK on 5–7 July 2005

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
This Feature Is Available To Subscribers Only

or Create an Account

Close subscription notice
Close access options