Skip to Main Content
Article navigation
Volume 17, Issue 2
1 February 1945
This article was originally published in
Aircraft Engineering
Aircraft Engineering Cover Image for Volume 17, Issue 2
Review Article| February 01 1945

Rings for Two‐decked Fuselages: Method of Analysis of Two‐Story Frames by Orthogonalization

Leon Beskin, M.A.S.M.E., Ass. M.A.S.C.E., M.I.Ae.S.
Leon Beskin, M.A.S.M.E., Ass. M.A.S.C.E., M.I.Ae.S.
Structures Engineer, Engineering Division, Consolidated Vultee Aircraft Corporation, San Diego, California.
Search for other works by this author on:
This Site
PubMed
Google Scholar
Author & Article Information
Publisher: Emerald Publishing
Online ISSN: 2059-9366
Print ISSN: 0002-2667
© MCB UP Limited
1945
Aircraft Engineering (1945) 17 (2): 39–40.
https://doi.org/10.1108/eb031216

INTRODUCTION WITH the current trend toward the in crease of the dimensions of aeroplanes, many two‐decked aeroplanes are being designed.

This content is only available via PDF.
© MCB UP Limited
1945
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$39.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
69 Views
View Metrics
A hybrid IDBO-BP-NN model considering work-hardening for surface roughness prediction in two-step milling of GH4169 superalloy
Virtual reality assessment of cockpit ınstrument panel ergonomics: analyzing the relationship between layout philosophy and operational efficiency
Development of a rectifier grille to improve flow-field uniformity by mitigating wake vortices in rotating-arm wind-tunnel apparatus
Modeling and simulation analysis of an airship’s leveling process during non-forming ascent

Suggested Reading

The Analysis of Fuselages of Arbitrary Cross‐section and Taper
Aircraft Engineering (March,1959)
Control system designing for correcting wing–fuselage assembly deformation of a large aircraft
Assembly Automation (February,2017)
Numerical study on predicting and correcting assembly deformation of a large fuselage panel during digital assembly
Assembly Automation (April,2014)
The Analysis of Fuselages of Arbitrary Cross‐section and Taper: A DSIR Sponsored Research Programme on the Development and Application of the Matrix Force Method and the Digital Computer
Aircraft Engineering (May,1959)
The Analysis of Fuselages of Arbitrary Cross‐section and Taper: A DSIR Sponsored Research Programme on the Development and Application of the Matrix Force Method and the Digital Computer
Aircraft Engineering (March,1961)

Related Chapters

Consistent Estimation and Orthogonality
Missing Data Methods: Cross-sectional Methods and Applications
3 Sucker decks: minimising deck depths at critical headroom locations
Bridge design for economy and durability: Concepts for new, strengthened and replacement bridges
Remaining Life of Orthotropic Steel Bridge Decks
Fourth international conference on Current and future trunds in Bridge design, construction and maintenance: Proceedings of the 4th international Conference organised on behalf of the Structural and Buildings Board of the Institution of civil Engineers, and held in kuala Lumpur, Malaysia, 10–11 October 2005

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal