Skip to Main Content
Article navigation
Volume 19, Issue 4
1 April 1947
This article was originally published in
Aircraft Engineering
Aircraft Engineering Cover Image for Volume 19, Issue 4
Review Article| April 01 1947

Joints in Flat Panels Subjected to Shear and Combined Shear and Tension

F.W. David, A.F.R.Ae.S.;
F.W. David, A.F.R.Ae.S.
Mr. F. W.T David is chief designer of Commonwealth Aircraft Corp. Pty. Ltd., Melbourne, Australia
Search for other works by this author on:
This Site
PubMed
Google Scholar
J. Solvey, A.F.R.Ae.S.
J. Solvey, A.F.R.Ae.S.
Mr. J. Solvey design engineer of Commonwealth Aircraft Corp. Pty. Ltd., Melbourne, Australia
Search for other works by this author on:
This Site
PubMed
Google Scholar
Author & Article Information
Publisher: Emerald Publishing
Online ISSN: 2059-9366
Print ISSN: 0002-2667
© MCB UP Limited
1947
Aircraft Engineering (1947) 19 (4): 118–124.
https://doi.org/10.1108/eb031494

THIS paper deals with semi shear‐resistant panels (incomplete tension fields) subjected to pure shear—as well as combined shear and tension loads. It establishes the stresses in the midplane of the sheet and the loads acting on panel joints.

This content is only available via PDF.
© MCB UP Limited
1947
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$39.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
100 Views
View Metrics
A hybrid IDBO-BP-NN model considering work-hardening for surface roughness prediction in two-step milling of GH4169 superalloy
Virtual reality assessment of cockpit ınstrument panel ergonomics: analyzing the relationship between layout philosophy and operational efficiency
Development of a rectifier grille to improve flow-field uniformity by mitigating wake vortices in rotating-arm wind-tunnel apparatus
Modeling and simulation analysis of an airship’s leveling process during non-forming ascent

Suggested Reading

The effect of ply drop-off on tensile strength of thermoplastic carbon fiber composite: a numerical and experimental study
Engineering Computations (March,2022)
Modelling of temperature distribution along PCB thickness in different substrates during reflow
Circuit World (January,2020)
Application of an ADI scheme for steady and periodic solutions in a lid‐driven cavity problem
International Journal of Numerical Methods for Heat & Fluid Flow (November,2007)
Sandwich Construction: Correlation and Extension of Existing Theory of Flat Panels Subjected to Lengthwise Compression
Aircraft Engineering (July,1960)
Assessment of flow and force predictions on representative high-sided vehicles at multiple yaw angles using SST-DDES
International Journal of Numerical Methods for Heat & Fluid Flow (November,2025)

Related Chapters

15. COMPARISON OF EXPERIMENTAL RESULTS WITH RESPONSE ANALYSIS FOR A MODEL OF A PRESSURE VESSEL
MODEL TECHNIQUES FOR PRESTRESSED CONCRETE PRESSURE VESSELS: Proceedings of the Conference organized by The British Nuclear Energy Society in London 10–11 July, 1969
47. Mechanical properties and microstructure of neutronirradiated ferritic-martensitic steel, used as wrapper material for the BN-350 and BN-600 fast reactors
Fast reactor core and fuel structural behaviour
8. Interpretation of single pin tests of the PFR/TREAT programme with the PHYSURA code
Science and technology of fast reactor safety

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal