Skip to Main Content
Article navigation
Volume 24, Issue 7
1 July 1952
This article was originally published in
Aircraft Engineering
Aircraft Engineering Cover Image for Volume 24, Issue 7
Review Article| July 01 1952

Cross‐Flow Heat Exchangers—Part II: The Honeycomb Type Exchanger and Some General Considerations

J.K. Reid, B.Sc.(Hons.), F.R.Ae.S.
J.K. Reid, B.Sc.(Hons.), F.R.Ae.S.
Search for other works by this author on:
This Site
PubMed
Google Scholar
Author & Article Information
Publisher: Emerald Publishing
Online ISSN: 2059-9366
Print ISSN: 0002-2667
© MCB UP Limited
1952
Aircraft Engineering (1952) 24 (7): 198–205.
https://doi.org/10.1108/eb032178

AS the rate of heat transfer by forced convection from a fluid to a metal surface is relatively low, it is necessary to provide a large area of metallic surface while keeping down the overall volume of the exchanger. One design of exchanger which meets this requirement very effectively is the honeycomb type of construction shown in FIG. 11.

This content is only available via PDF.
© MCB UP Limited
1952
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$39.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
136 Views
View Metrics
Development and validation of a perceived aviation risk scale: evidence from public samples
Dynamic energy harvesting in unpowered flight: empirical flight mechanics and aerodynamic design implications
Integrated design method of aircraft RBF neural network-based fault diagnosis and nonlinear dynamic inversion control
A comparative analysis of YOLO lightweight models for foreign object detection at airports

Suggested Reading

Negative stiffness honeycombs for recoverable shock isolation
Rapid Prototyping Journal (March,2015)
Shear band propagation in honeycombs: numerical and experimental
Rapid Prototyping Journal (March,2018)
Effective heat conductivity of Honeycomb (porous) composite panel
Journal of Engineering, Design and Technology (January,2021)
Build accuracy and compression properties of additively manufactured 304L honeycombs
Rapid Prototyping Journal (April,2020)
Energy absorbing capability of additive manufactured multi-material honeycomb structure
Rapid Prototyping Journal (December,2018)

Related Chapters

DIAGNOSTIC, ASSESSMENT AND REPAIR OF HONEYCOMB CONCRETE IN ALGIERS NEW AIRPORT REINFORCED CONCRETE TERMINAL BUILDING
Challenges of Concrete Construction: Volume 3, Repair, Rejuvenation and Enhancement of Concrete: Proceedings of the International Seminar held at the University of Dundee, Scotland, UK on 5–6 September 2002
EVALUATING STRUCTURAL CONCRETES USING SUBSURFACE RADAR
Concrete Durability and Repair Technology
A novel modular constructional element
Space Structures 5

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal