Skip to Main Content
Article navigation
Volume 29, Issue 11
1 November 1957
This article was originally published in
Aircraft Engineering
Aircraft Engineering Cover Image for Volume 29, Issue 11
Review Article| November 01 1957

Measurement of Adhesive Moduli: The Use of Ultrasonics to Measure the Dynamic Modulus of Metal‐to‐Metal Adhesive Joints Available to Purchase

P.F. Tapp;
P.F. Tapp
Search for other works by this author on:
This Site
PubMed
Google Scholar
A. Broodo;
A. Broodo
Search for other works by this author on:
This Site
PubMed
Google Scholar
C.E. Horn;
C.E. Horn
Search for other works by this author on:
This Site
PubMed
Google Scholar
S.V. Castner
S.V. Castner
Search for other works by this author on:
This Site
PubMed
Google Scholar
Author & Article Information
Publisher: Emerald Publishing
Online ISSN: 2059-9366
Print ISSN: 0002-2667
© MCB UP Limited
1957
Aircraft Engineering (1957) 29 (11): 350–352.
https://doi.org/10.1108/eb032893

MANY efforts have been made to evaluate adhesion by relating adhesion to measured forces. Many of these are comparative and do not actually measure adhesion alone, but depend upon some related property of the adhesive film—such as toughness, cohesion, brittleness, hardness or elasticity.

This content is only available via PDF.
© MCB UP Limited
1957
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$39.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
105 Views
View Metrics
Robust longitudinal control for a hypersonic glider with moving-mass actuation via L1-augmented dynamic inversion
Nonlinear geometric multivariable control for unmanned aircraft flight system
Numerical simulation of strut angle optimization for enhanced performance in DLR scramjet combustor
Active disturbance rejection control optimized via chaotic comprehensive learning pigeon-inspired optimization for flapping-wing aerial vehicle

Suggested Reading

Temperature stress for bending beam with different moduli under different constraints
Multidiscipline Modeling in Materials and Structures (August,2014)
Interpretation of shear moduli from cone pressuremeter tests in sand
Geotechnique (March,1994)
Interpretation of moduli from self-boring pressuremeter tests in sand
Geotechnique (June,1989)
A new method to measure the axial and shear moduli of bamboo
Proceedings of the Institution of Civil Engineers - Structures and Buildings (February,2017)
Estimating the elastic modulus of concrete made with artificially manufactured lightweight aggregates
Structural Survey (June,1995)

Related Chapters

Investigating modulus-moisture-density correlations for compacted subgrade soils
Geotechnical Engineering for Infrastructure and Development: XVI European Conference on Soil Mechanics and Geotechnical Engineering
IN SITU MECHANICAL DETERMINATION OF ELASTIC MODULUS OF CONCRETE
Challenges of Concrete Construction: Volume 3, Repair, Rejuvenation and Enhancement of Concrete: Proceedings of the International Seminar held at the University of Dundee, Scotland, UK on 5–6 September 2002
37. Pavement design with the pavement pressuremeter
Pressuremeters. Third international symposium: Proceedings of the Third International Symposium on Pressuremeters, organised by the British Geotechnical Society and held at Oxford University, 2–6 April 1990

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal