Article navigation
Volume 38, Issue 12
1 December 1966
This article was originally published in
Aircraft Engineering
Aircraft Engineering Cover Image for Volume 38, Issue 12
Review Article| December 01 1966

Developments at Electro‐Hydraulics: A review of recent advances in component design and a summary of fatigue tests on hydraulic tubes

Publisher: Emerald Publishing
Online ISSN: 2059-9366
Print ISSN: 0002-2667
© MCB UP Limited
1966
Aircraft Engineering (1966) 38 (12): 12–13.
https://doi.org/10.1108/eb034217

RECENT developments at Electro‐Hydraulics Ltd. are in two categories: in component design and in solutions to basic hydraulic problems. Examples shown below are selected from a number of fairly recent component design details, followed by an outline of developments in seals and a summary of fatigue tests on hydraulic tubes.

This content is only available via PDF.
© MCB UP Limited
1966
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Pay-Per-View Access
$39.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
96 Views

New and popular articles

Kriging-assisted full-envelope ADRC gain scheduling for fixed-wing UAVs
An AHP-fuzzy FMEA and bow-tie barrier approach for maintenance risk assessment of outdoor-parked general aviation aircraft
Bottom-up computational design of a hybrid tricopter agricultural spray UAV: propeller, nozzle, tank and airframe CFD optimization
Agricultural waste to aircraft interiors: mechanical, dynamic mechanical and durability characteristics of rice husk-reinforced composites based on waste polyethylene terephthalate

Suggested Reading

Research on the leakage of continuous rotary electro-hydraulic servo motor based on fluid structure interaction analysis
Industrial Lubrication and Tribology (April,2018)
Cross-coupled sliding-mode synchronization control for electro-hydraulic verticality correction of a TRD chain-type trenching machine
Sensor Review (September,2026)
Electro-Osmosis in Soils
Geotechnique (June,1949)
Numerical analysis of electro-osmosis consolidation: a case study
Geotechnique Letters (August,2015)
Electro-biogrouting stabilisation of soft soil
Environmental Geotechnics (March,2014)

Related Chapters

Mathematical model of electro-osmotic consolidation for soft ground improvement
Bio- and Chemo-Mechanical Processes in Geotechnical Engineering: Géotechnique Symposium in Print 2013
Analytical solution for axisymmetric electro-osmotic consolidation
Bio- and Chemo-Mechanical Processes in Geotechnical Engineering: Géotechnique Symposium in Print 2013
Electrokinetic behavior of two clayey soils based on laboratory experiments
5th ICEG Environmental Geotechnics: Opportunities, Challenges and Responsibilities for Environmental Geotechnics: Proceedings of the ISSMGE’s fifth international congress organized by the Geoenvironmental Research Centre, Cardiff University and held at Cardiff City Hall on 26–30th June 2006

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
This Feature Is Available To Subscribers Only

or Create an Account

Close subscription notice
Close access options