Skip to Main Content
Article navigation
Volume 60, Issue 7
1 July 1988
This article was originally published in
Aircraft Engineering
Aircraft Engineering Cover Image for Volume 60, Issue 7
Review Article| July 01 1988

The Catic Modular Fixturing System Available to Purchase

David Stockton
David Stockton
Technical Sales Manager, Kuikka Workholding
Search for other works by this author on:
This Site
PubMed
Google Scholar
Author & Article Information
Publisher: Emerald Publishing
Online ISSN: 2059-9366
Print ISSN: 0002-2667
© MCB UP Limited
1988
Aircraft Engineering (1988) 60 (7): 16–17.
https://doi.org/10.1108/eb036644

THE philosophy of “just in time manufacture” is being adopted by more and more forward looking companies. To achieve “just in time manufacture” one of the basic requirements is “just in time fixturing”. You cannot have one without the other.

This content is only available via PDF.
© MCB UP Limited
1988
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$39.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
173 Views
View Metrics
Dynamic consistent hierarchical decoupling optimization of modular microsatellite structures for on-orbit assembly
Design and aerodynamic analysis of multidimensional combined morphing for supersonic aircraft forebody
Designing an audit-safe analytics architecture for aircraft maintenance decision support in regulated aviation environments
Large-scale optimisation of aircraft spare parts using cooperative coevolutionary genetic algorithms

Suggested Reading

Precise manipulation approach to facilitate interactive modular fixture assembly design in a virtual environment
Assembly Automation (August,2008)
Towards the development of a desktop virtual reality‐based system for modular fixture configuration design
Assembly Automation (February,2009)
Flexible fixturing for workpiece positioning and constraining
Assembly Automation (June,2002)
Computer‐aided fixture design verification
Assembly Automation (December,2002)
Control and programming of a multi‐robot‐based reconfigurable fixture
Industrial Robot (June,2013)

Related Chapters

25 years of monitoring of rock anchors installed for landslide stabilisation at Nantgarw, South Wales
Ground Anchorages and Anchored Structures in Service 2007: Proceedings of the two day international conference organised by the Institution of Civil Engineers and held in London on 26 and 27 November 2007
Seminar one: 10. APPROACHES TO WATER CONSERVATION & DEMAND MANAGEMENT IN THE UK, EUROPE & THE USA
WATER ENVIRONMENT '96 “SUPPLY AND DEMAND - A FRAGILE BALANCE”
Adoption of Green Building Practices in Kenya: A Case of Kakamega Municipality
Pragmatic Engineering and Lifestyle: Responsible Engineering for a Sustainable Future

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal