The purpose of this paper is to simulate with in-depth reconstruction of existing geometry a process of cooling of the aircraft engine in pusher configuration, which is more problematic than usually used, tractor configuration. Moreover, a complex thermal and fluid flow analysis is necessary to verify that an adequate cooling is ensured and that temperatures in the engine nacelle are maintained within the operating limits.
Methodology used in this research is based on computational fluid dynamics tools to model adequately the internal and the external flow, to find the state of cooling system and research the results of baffles modification inside the engine cover. Additionally, two types of the cover with different sizes of inlets and outlets are tested.
The results showed the influence of baffles modifications and changes in inlets and outlet sizes on the mass flow rate and temperature distributions inside the engine nacelle. The best configuration of air inlets and outlets was determined.
The method used in the research is the safest method in testing of such cases, provided the proper approach in modeling is taken. The collaboration of internal and external flow is crucial and should not be replaced with assumed flow rate through inlet and outlet area. The obtained results will help in future studies on cooling systems of engines in pusher configuration.
The work presents original results obtained by the authors during a complex fluid flow and heat transmission analysis and is a part of the design project of the OSA patrol aircraft.
