Skip to Main Content
Article navigation
Purpose

This paper aims to address the spacecraft attitude control problem using hybrid actuators in the presence of actuator saturation, uncertainties and faults, inertia uncertainties and external disturbances.

Design/methodology/approach

A hybrid actuator configuration is used where thrusters are engaged for rapid attitude maneuvers, while reaction wheels (RWs) are used for fine pointing.

Findings

The key advantages are two-fold: a finite-time high-level controller is designed to produce the three-axis virtual control torques; an online robust control allocation (RobCA) scheme is proposed to redistribute virtual control signals to the actuators with taking into account the actuator saturation, uncertainties and faults; and the RobCA scheme allows a smooth switch between thrusters and RWs, which handles the inaccuracy problem of thrusters and saturation problem of RWs.

Practical implications

An online RobCA algorithm is designed that maps the total control demands onto individual actuator settings and allows a smooth switch between thrusters and RWs. Simulation results show the effectiveness of the proposed control strategy.

Originality/value

This work may be used on modern space missions, which impose higher requirements on smooth switching of spacecraft thrusters and RWs.

Licensed re-use rights only
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$39.00
Rental

or Create an Account

Close Modal
Close Modal