... 09 04 2026 08 06 2026 04 07 2026 © 2026 Emerald Publishing Limited 2026 Emerald Publishing Limited Licensed re-use rights only Axial flux PM brake Eddy currents Temperature Transient thermal model 3D fem Experimental prototype Induced power heating Torque...

... Publishing Limited Licensed re-use rights only 3D FEM Litz wire AC copper loss Parallel wire Three-phase synchronous motor Zooming method Because of an increase of rotating speed in electric machines, the frequency of the current is increased (Bianchi et al., 2015). In high...

... Licensed re-use rights only 3D FEM HTS transformer Modeling Equivalent circuit Partial core Theoretical method High-temperature superconducting (HTS) transformer is expected to be one of the superconducting power devices that will be installed in power system at the first stage...

... 11 07 2017 08 08 2017 © Emerald Publishing Limited 2018 Emerald Publishing Limited Licensed re-use rights only Computational model Condition monitoring Finite element analysis 3D FEM Leakage current Design optimization Electrical field Dielectric properties Surge...

... step are: 3D FEM Steady state Waveform relaxation method In electrical engineering, the finite element method (FEM) associated with the time-stepping numerical scheme is the most accurate method and is therefore the most used approach today to study electromagnetic structures...

... the different ways of solutions will affect the full 3D solving process. This investigation of a simple magnetic circuit problem to evaluate the benefits of computational methods provides the basis for considering this formulation in a 3D-FEM code for further investigation. Rene Plasser is the corresponding...

...-dimensional (3D) FEM of machine was used. Using a field-circuit model of machine with inter-turn short-circuit, it is possible to obtain waveforms of phase current, torque and speed for voltage excited supply. The presented results focus on the analysis of the influence of an inter-turn short circuit on phase...

.... Torque waveform 3D FEM Induction motor Inter-bar current The interbar current of the squirrel-cage induction motor (IM) flows in the steel sheets when the secondary conductor is not insulated from the steel sheets. It was reported that the interbar current was increased when skewing...

... be contacted at: tsibukis@auth.gr 30 03 2016 16 06 2016 © Emerald Group Publishing Limited 2016 Emerald Group Publishing Limited Licensed re-use rights only Optimization techniques Applied electromagnetics Electromagnetic waves 3D FEM Antennas The design of beam...

... of the metamaterial-based WPT system for various Tx-Rx distancesin terms of (a) magnitude of-parameters and (b) power efficiency © Emerald Group Publishing Limited 2016 3D FEM Metamaterials Power systems Applied electromagnetics Microwaves Wireless power transfer Resonators Wireless energy...

... controllable gaps enabling more degrees of freedom for design purposes. 3D FEM Optimal design Applied electromagnetics Microstructures Actuators Electromechanical devices Micro-electromechanical systems (MEMS) Programmable resonators Piezoelectric Synthetic metamaterials THz modulators...

... Publishing Limited 2016 Mathematical modelling 3D FEM Induction heating Induction surface hardening is a kind of heat treatment where a hardened body is heated by induction and then immediately cooled mostly by spraying its surface or sometimes by merging the body into a container...

... (e.g. Steinmetz) analytical formula. The boundary condition respects both convection and radiation and may be expressed in the form: (Equation 5) © Emerald Group Publishing Limited 2016 3D FEM Lasers Laser heating Applied electromagnetism Numerical analysis Coupling Coupled...

... Limited 2016 Optimization 3D FEM Permanent magnet machine Inductance Fault tolerance Flux-switching permanent magnet machines (FSPMM) has been the subject of research for many years because of the simple and robust rotor, large torque capability, and high-power density. The different...

... and Johnson, 1955 ; Ruiwu et al., 2012 ; Zhu et al., 2005 ; Hoang et al., 2007). Electrical machine 3D FEM Permanent magnet machine SFPM Switched flux machine End-effect Torque-speed characteristics Torque-speed curve © Emerald Group Publishing Limited 2016...

... in a kinematic dynamo configuration using an analytical velocity field. Originality/value – The findings offer a basis to a scenario for the VKS dynamo. © Emerald Group Publishing Limited 2016 3D FEM Edge element method Numerical simulation Eddy current Coupled phenomena Maxwell’s equation...

... of FEM, block-MOR is presented, in which the whole domain is subdivided into N-blocks. As a result computational cost for MOR can be reduced. Takahiro Sato can be contacted at: tsato@em-si.eng.hokudai.ac.jp © Emerald Group Publishing Limited 2015 Finite element method 3D FEM...

... the initial guess of δ x (k) is set to a zero vector, the following relational expression is satisfied: (Equation 7) 3D FEM Numerical methods Krylov subspace method Newton-Raphson method Line search Nonlinear finite element analysis Relaxed convergence criterion To accurately...

... and magnetic T -Ω formulations will be considered. 3D FEM Applied electromagnetics Electromagnetic fields Numerical modelling For many years a lot of work has been done on the numerical error estimators. Some contributions are based on a priori error analysis, which allows to evaluate...

... in Figure 3 . © Emerald Group Publishing Limited 2014 3D FEM Magnetic forces Concentrated winding permanent magnet machines Interior permanent magnets Surface mounted permanent magnets Von Mises strain In recent years, much attention is focussed upon Concentrated Winding Permanent...